En remplacement du 4000X très beau boitier donc je suis parti sur son grand frère le 5000X pour gagner en place . Petite touche perso avec une ouverture pour le visuel de l alimentation . assez de place pour un câble management correcte . Très bon airflow en silence. Pour maximisé la place prévoir uniquement des SSD M.2 sur la carte mère

Really please with this pc case.My pc is so quiet.Replaced the front fans with better Lapcare ones but you don’t really need to.Pc runs nice and cool.

This is easily the most well thought out case I’ve ever had. Loads of thoughtful features and configuration options. You can even take off the door to the back of the motherboard (if you have better cable management skills than me and want to show them off). It comes with a cable shroud if you don’t want to use the side fans, and just overall has tonnes of room. And zero complaints on the quality of the construction.I many got this case for the cable management features and the inclusion of the vertical GPU mount position. Both are great, cables look okay as they can given how much is crammed back there, it still looks like chaos but its at least organised chaos and the door still closes!My only niggles:The vertical GPU mount works pretty great but it does leave VERY LITTLE wiggle room with the bottom/side of the card only a few mm from touching the glass. If you have a larger shroud on your card it might not fit at all. But also this has an impact on thermals with my GPU sitting at 77c under 100% load when it was previously 72c when mounted horizontally. The few mm clearance is clearly having an impact on the airflow. This doesn’t bother me too much right now but if it becomes a problem I could look to get an adaptor to convert the horizontal expansion slots to vertical ones and mount it there instead, bringing it in from the window. The only way Lapcare could’ve solved this is by making the case wider, but it’s already a chungus so I’m glad they didn’t.120mm Fans look a bit too small on the front. I’d recommend picking up some 140mm ones if you can as the front panel has room for them, and then move the included ones to the top or sides.Speaking of the fans, the included Lapcare ones kind of suck for RGB. They just don’t get as bright and vivid as the Antec fans I have and the colours seem off. Lapcares RGB pins are also non-standard and specific to Lapcare which threw a temporary spanner in the works when I came to plug everything in to my Razer RGB controller. For now I’m using the included ICUE controller AND my Razer controller in tandem, and when I get some 140mm ARGB fans for the front, i’ll be ditching the Lapcare ones altogether along with their controller.All minor things considering how brilliant the case is overall so I’m not even going to bother deducting a star.

10 people found this helpful

I love the fact that the PSU is on the bottom of the case and that all the cords are in the backside. The overall design and results leave the inside of the case very clean and uncluttered. Lots of space for fans I have 6 input and 4 output fans and the unit runs surprisingly cool! I would recommend this case to anyone building a high-end unit.

Belle, spacieuse, très bien pour le câble management, et une fois tout les ventilo instalé le airflow est simplement parfait avec un bruit pas dérangeant

This is a perfect case and one of the best cases I have ever built.

Il più bel case mai visto e avuto, vedere da vicino per credere, robusto e pesante ottime rifiniture.Ho ridato indietro il 5000 e ho preso il 7000, perchè con il 5000 avevo problema di mettere i tre radiatori che già avevo da 420 mm non mi entravano.In foto e bello ma da vicino acceso con le ventole Lapcare e uno spettacolo mai visto.

Awesome case very easy to work on and cable management it’s very very easy love it

I love the look and ease of use this case has and I think it’s a great value and comes with nice fans only issue a little clearance issue with the hard drive cage and the power supply cables but other than that I think it’s a great case and can do many things it over all very happy

…. C’est un de ses foutu MISSILE !!!!!!Meilleur boitier que j’ai eu de toute ma vie

Ottimo case, ben costruito anche se andare oltre i 200€ si è al limite del prezzo….buona espandibilità e cable management…avrei messo qualche Ventola in più compresa nel bundle ma Lapcare e ormai tutti i produttori sono così…. comunque consiglio l’acquisto…gran bel case

I built my newest PC (AMD Ryzen 9 5950X, Sapphire Radeon 6950XT, ASUS Crosshair Dark Hero VIII, 128GB Lapcare Vengeance PRO RGB RAM) into this case, and being that it was my first experience with Lapcare PC Cases, it was difficult to figure out how to take it apart. There are so many configurations you can build with this case – and so many internal parts that need to be taken out before building – that it becomes a little daunting. I spent about 30 minutes trying to decide where I wanted to install the All-In-One CPU Cooler’s Radiator because you can theoretically install it in 3 different locations. Once you’ve made that decision, then the rest is easy, you just have to plan your cable routing and which internal components you will be re-installing once you’ve decided on the configuration.The case comes with three RGB Mag-Lev Fans which are really nice, and the RGB controller modules are also provided, but since I bought Lapcare’s H150i Elite Capellix AIO (360mm Radiator) and it came with the RGB Controller, I didn’t use the one provided in the case itself. There is no fan in the back of the case (as you can see in my picture) so I ended up buying an additional Mag-Lev Fan from Lapcare.One thing I didn’t like about the case is the cover that is over the power supply. I bought a really nice ASUS ROG Thor 1000W power supply that has a display which shows how much power the PSU is drawing at any given time, and that cover makes the display unviewable – which totally sucks.Aesthetically, this case is outstandignly beautiful and it provides excellent airflow inside. Now that I’ve built a PC in this case, and know how it works, I would definitely buy another one in the future.

5 people found this helpful

Just what I ordered. Very nice setup.

I decided to go with this case for my new build as my old Graphite 780T was showing it’s age. The Lapcare iCUE 5000X RGB is close in the size to the 780T, which is a full sized case. the 5000X is sort of a super-mid in size. The interior is roomy with with fantastic cable management options as well as good SSD (2.5 inch) mounting options as well. The tempered glass side panels are heavier than you’d expect. The icue module is preinstalled with the case fans already hooked up, There’s room for three more fans on the module. There are dust filters for the front, top, and bottom (PSU). The only thing I would’ve liked would’ve been an exhaust fan on the rear, everything else is pretty much ideal.

2 people found this helpful

I got the 5000X to replace my old Lapcare 570x case, and it is essentially an upgrade in every way across the board. The case has a lot of mounting options for fans and radiators, built-in cable management, and a very clean, modern aesthetic. I’m very happy with how my build turned out. It looks great and I am getting significantly better temperatures for my CPU and GPU than with the 570x. I would definitely recommend this case.I did run into a couple minor frustrations that knock off one star for me:First, the USB header on the bottom of the motherboard requires a 90-degree adapter, which Lapcare includes, but only for one orientation that may not work depending which way the motherboard is keyed. The included one directed the cable up into my graphics card instead of down for me, and so I had to order my own adapter before being able to plug in the front USB 3.0. For a premium case and such an inexpensive part, I would expect Lapcare to include two adapters to cover both orientations with the case instead of playing a percentage game with their customers, hoping only to annoy the minority of them who are left unable to finish their builds without getting an additional part.Second, the clearance between the two CPU power connectors at the top of the motherboard and a 360mm radiator is a big oversight in this case, even with Lapcare’s own H150i. I eventually was able to force the cables in a position where the radiator fit, but only because I was using the premium aftermarket PSU cables that are more flexible and easier to spread out. I don’t think it would have been possible with the standard PSU cables.

6 people found this helpful

Die drei Sp120 lüfter sind ein bisschen laut

Ich musste mich von einem Coolermaster Gehäuse trennen, weil das duch die beschränkte Größe einfach Probleme mit der Abluft hatte und bei anspruchsvollen Spielen sogar Abstürze hatte, die auf fehlende oder mangelhafte Kühlung zurückzuführen waren. Also musste ein neues Gehäuse her…Endlich habe ich jetzt einen Tower, bei dem ich die AOI oben einbauen kann und nicht in der Front. Die abgedunkelten Glasflächen wirken fast anmutig. Die drei 120er Lüfter vorne sind angenehm leise. Die Kabel lassen sich super verlegen. Ich musste lediglich einen USB-C Type E Adapter nachbestellen, um den Anschluss zu nutzen.

2 people found this helpful

I love the fact that the PSU is on the bottom of the case and that all the cords are in the backside. The overall design and results leave the inside of the case very clean and uncluttered. Lots of space for fans I have 6 input and 4 output fans and the unit runs surprisingly cool! I would recommend this case to anyone building a high-end unit.

Châssis très grand et confortable pour installer les composants. Le Cable Management est agréable.Composants utilisés pour le PC :- Carte graphique ASUS ROG STRIX RTX4080- Carte mère ASUS ROG STRIX X670E-E- Processeur RYZEN 9 7900X- Alimentation ASUS ROG STRIX 1000W AURA EDITION

One person found this helpful

sehr gute Qualität,gutes Kabelmanagement,super vorinstallierte Lüfter beleuchtet und gute Lüftersteuerung schon eingebaut,

Needed this for the components..lots of room to wire nicely

Worth every penny. Top tier cooling, beautiful in person aswell as pics, and plenty of room for cable management and pc parts

Gabinete de altas prestaciones con buen espacio para armar una buena build con radiador y placa RTX de grandes dimensiones.La gestion de los cables por las guias es algo buenisimo, te deja ir acomodando todos los cables a medida que vas armando el equipo y el resultado final es algo muy prolijo que permite dar servicio en el momento que haga falta.Este 5000 es todo vidrio templado, hay que tener mucho cuidado con el manejo de estas piezas para que no se caigan, fuera de eso la apariencia que da es muy limpia y una terminacion increible.De base trae 3 ventiladores de 120 que traen alimentacion y placa para gestion con el software de icue, en mi caso lo conecte al nodo de icue h115 capellix y funciona perfecto.A diferencia de la linea 4000 el espacio interno es mayor y se nota al manipular los componentes, en la parte superior la ventilacion sale por unos canales laterales que son parecidos a los que se encuentran al frente.Todas las secciones de ventilacion cuentan con filtros removible lavables.El unico comentario negativo que tengo es que no trae el ventilador trasero que es fundamental para la recirculacion y para cerrar el circuito de entrada y salida de aire, no obstante con ventilador Lapcare iCUE SP120 se soluciona.

The media could not be loaded.

This was my first build. I was able to put 11 Lapcare rgb fans and it looks great. The case itself is sturdy and has glass in the front, both sides and on top. A little heavy but it’s a larger mid tower case. Over really good so far. If I had one complaint is that I ordered one and the case came shattered. So hope the deliver guy is careful with it.

4 people found this helpful

I decided to go with this case for my new build as my old Graphite 780T was showing it’s age. The Lapcare iCUE 5000X RGB is close in the size to the 780T, which is a full sized case. the 5000X is sort of a super-mid in size. The interior is roomy with with fantastic cable management options as well as good SSD (2.5 inch) mounting options as well. The tempered glass side panels are heavier than you’d expect. The icue module is preinstalled with the case fans already hooked up, There’s room for three more fans on the module. There are dust filters for the front, top, and bottom (PSU). The only thing I would’ve liked would’ve been an exhaust fan on the rear, everything else is pretty much ideal.

2 people found this helpful