About this item
- 4 new-tech copper pipes will dissipate CPU heat with maximum efficiency/ Blue LED
- Aluminum/ 127×50×155 mm /120 Fan / 120×120×25mm
- 500~1650 RPM±10% / 64.5 CFM / 2.1 mmAq (Max) / ?27.8 dB(A)
- Intel LGA1200/1151/1150/1155/1366 , AMD AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2/FM1
- 1 years of Brand Warranty.
Technical Details
- Brand DEEPCOOL
- Manufacturer Deepcool, Deepcool
- Model GAMMAXX 400 V2 BLUE
- Product Dimensions 12.9 x 8 x 15.5 cm; 606 Grams
- Item model number GAMMAXX 400 V2 BLUE
- Mounting Hardware CPU Air Cooler
- Noise Level 27.8 dB
- Voltage 110220 Volts
- Wattage 180 Watts
- Batteries Included No
- Batteries Required No
- Material Aluminium, Copper
- Includes Rechargable Battery No
- Manufacturer Deepcool
- Country of Origin China
- Item Weight 606 g
- Warranty 1 Year
Auqid Irfan –
Works better than the stock cooler, easy to install and manages to keep the temps under control. Noise is not that noticeble. From 90° to 75° on 100 percent cpu usage. Idle temp is 40°. With thermal paste included this is the best deal.
swapnil d. –
This is the best air cooler available in 2.5-3 k range. Temps never went above -63c even on continuous stress test for 1 hr
prafull XoXo –
SO i bought this for my AMD FX processorsince its been very long since I used such a cpu coolerand I had already owned deepcool gamaxx 300I thought why not since it was so cheapbut then I realised even though its cheap its tedious to mount it on AMD motherboardsbut after I got the job done there was significant increase in temps my temps at highest are resting at 49 – 63 degrees celcius at max loadand on normal load its at 37-51 degreeswhich is okay but very close to bad as long as it doesn;t touch 70 I’m fine or 80 for that matter
2 people found this helpful
R Ahmed –
Brought the temps of Ryzen 4 core CPU from 82 degrees to 45 degrees during Cinebench Test.Idle temps remain close to 38 degrees
Prodip malo –
Only cooler Box… packaging is very poor.
Ashish Kundan Vaity –
The media could not be loaded.
This cooler is damaged, the heat sink is bend or tilted which will not fit on the processor.
2 people found this helpful
MANU M KHARALIYA –
It’s nice product and works as described.
Saiviney –
I am speechless for its performance. I have always used the stock coolers which comes with the Intel cpus, always saw temperatures reaching the tjunc maximum of 100 and throttling my cpu.I had read multiple articles blaming it on the stock cooler, but I ignored them and bought a better thermal paste-thermal grizzly, it didnt help. At last during the great indian festival, I went ahead and bought this for ₹1400. There were not many coolers at this price for the LGA 1700 socket, and this was the cheapest!The temperatures which used to hit 100 during rendering 3D models on full load, came down to a maximum of 67-68, even after rendering for 15 mins at full load! Honestly I didn’t expect this kind of a drop in the temperatures!And I can’t hear any noise, its very quiet!I really loved it, go for it, if you are on a budget for your intel 12th gen cpus!
3 people found this helpful
Shashank –
Decent cooler. Does its job. Deepcool gammax 400 is better, but it didn’t fit my case, so went with 200. Works great so far. CPU temps reduced by around 15-20C.
Prasad Maitra –
What’s interesting about this CPU air cooler is the price and the value it provides. I was skeptical about this cooler at first due to its cheap price.Thanks a guy on YouTube have helped me know about the efficiency of this cooler and offer a step-by-step guide on installing this cooler has made me buy this cooler for my Ryzen 2600x.Since I built my PC I was relying on the stock cooler but temp soon getting high when playing games or remain above 50^ in idle mode.The worst thing is with AMD is the temp spikes which is a major concern for most budget PC builds. The temp after using this CPU cooler has massive dropped. With 6 case fan installed I can’t find the reason for overheating. Since I found a video explaining the installation process I took no time to buy it.The installation is pretty straight with provided paste (good quality) the CPU cooler did a decent job lowering my temp of 25^ approx. The CPU fan has a blue LED and goes straight into the CPU 4-Pin connector But sadly which the Fan lighting cannot be turned off.Anyways it looks decent and better than most CPU coolers. Although I expect the CPU fan to be RGB at least in dirt-cheap price. But the most highlighting factors of this CPU cooler is the extra fins (greater surface area) offering awesome heat dissipation right from the moment when CPU kicks in.I never tried a CPU cooler before but after using it more than 2 days I am very satisfied with the ability to manage thermals on my PC. I have attached a few screenshots for reference.>>Highlights<<>>Tower size CPU cooler with 157mm of height>>Extra fins offer a better surface area for better heat dissipation>>CPU fan remains silent even in full speed.>>Easy installation and can be installed without taking out the Mobo from the case>>Good quality thermal paste provided>>Temps on 100 loads didn’t go over 71^>>Best CPU air cooler for AMD Ryzen CPU’s
3 people found this helpful
Parmjit Singh –
Value for money temp gain befor this cooler 80 to 85 digreeAnd after this temps gain 58 to 60 digreeOn ryzen 5 3400g igpuThis cooler is worth it on this price range
Mampi –
Other products must failure. Too good making.
Akshay Raj –
Fan is noiceless and it decreases around 10 degrees of temp on my i5 10400f. Built quality is ok.
Sadik Shaikh –
It just take time to setup correctly nothing else
INDIRAN –
Installation is very tough….. suitable only for high tower pcs not for normal cabinet…..it won’t enough to fit in normal cabinet….u can’t close the cabinet….so I returned it
Nayan J –
I mean use few more pages to clear out confusion naa!I bought this for my newly built PC (ryzen PC).After struggling a lot and almost on the verge of returning this, I realized that I was connecting the metal piece to the heat sink part in wrong orientation and that’s why not able to fit it into the socket.Also there was dent in one side where fan attaching clip goes. Did not return it as not much of an issue
Sudarshan Kalwale –
Fans are noisy, Noctua in my rendering machine is silent by a long shot. But it’s ok for the price you are paying. It’s huge, powerful and keeps it cool well enough.
One person found this helpful
Aviresh –
The best cooler u can get under 2k rupees. Hugw temperature difference. On idle 31-33 degrees. In hardcore gaming 55-65 degrees. There is no fan noise. Complete silent. Blue led looks cool. 4 copper pipes. Just only problem i faced is while installing the back plates. All the videos i have seen on yt on this product got different back plates and I received a different back plate. I read the user manual nd installed the plate. Its easy tbh. Overall best cooler for ur cpu. Loved it .
One person found this helpful
Harsh –
Amazing Cooler from deepcool white 🤍 looks soo goodEasy to install supports AM4 and also IntelComing to thermals (Ryzen 3500) Ran cpu stress test for 30+ mins Temps don’t go above 57c @ full cpu loadIdel temps are 36c to 38c rangeResults :1) idel temps are 5c less then stock2) full load are 15-18c less then Ryzen stock coolerGood product from Deepcool 10/10
One person found this helpful
Manoj S. –
It almost impossible to attach this cooler to the processor. You need to remove the fan fist to install this.
One person found this helpful
Mukesh –
Abhishek Kumar –
8 to 10 °c temprature difference between this to stock cooler . Now my intel i5 11400 goes max temp 56 to 59°c. Withstock cooler 70 to 73°c.
One person found this helpful
Jacob Modgill –
I brought this Cpu Cooler after very research. Stock Cpu se maximum temperature 88°C mil raha tha to maine change karke Gammaxx 400 pro laga diya to ab maximum 67°C tak jata or normal use mein 38-47°C rehta , but mere room mein hamesha AC chal raha hota h 30°C pe. I like it baki ap apne hisab se dekho . Thnk u
Vinay Adiga –
used with i7 10700 with msi b460 tomahawk..works perfect..no thermal throttling.keeps under 90°C under synthetic load.
shashankj12 –
no one beat this cooler in this price range.I am run intel 11400 at full load. See diffrence in pic Normal load & full loadBut the tem. is not cross 70*CIts amazing…….
Shyam –
THIS COOLER IS BEST FO BUDGET PC BUILERS .BEST FOR PROCESSORS UNDER 95 TDP
Lanchenba Thoudam –
Easy installed
Siddharth S. –
It’s Soo good my cpu temps are way better now I totally recommend this and I recommend this over hyper 410r which it beats easily is low cost buy this u won’t regret.
Prudhvi –
Installation is little tricky but the price to performance of this heatsink is way goodJust go for it if you are on budgetA must if you want to overclock your CPUCon:You cannot change the color of the light or switch it off
One person found this helpful
FieryGoon971 –
Noise level is minimal, Heat Vent Quality would have been better, but overall build quality is really awesome for the price, really easy to install on Z390E mobo, efficient cooling.
abhijith ps –
The media could not be loaded.
temperature of my i5 9400f was 80-90 while gaming and 47 to 55 while idle . i replaced the deepcool stock fan with my cooler master sikle flow 140mm rgb fan. The 140 mm fits well with the sink. and the temperature i am getting with this was 55-66 maximum (100% cpu usage) while gaming and and 35 to 38 on idle .
Viswanath –
Return window completed, and not usable. Check for correct bracket before placing the order.Product looks shiny, but if i cannot fix it as per description, what is the use..? Wrong Description.I have AMD 8350, with GB 970 MB, and there is no supporting bracket for this AM3/AM3+ model processor.
One person found this helpful
Max Langel –
I disliked that the rfg doesnt work from the start and i cannot get a return or claim my warranty. I dont even asked for a return , the automated keep asking pre programmed questions which are not relevant with my problems.I jst need my warranty, repair or exchange with a new one.
cranky –
This is a replacement for an Intel stock cooler and performance is not significantly better. While the surface area is larger, the small contact patch and the relatively low thermal mass means the CPU can’t move a lot of heat quickly enough on to the aluminum.The fan speed is capped at 1600RPM when used off of a PWM header, so you’ll never see great temperatures. The fan is also not swappable, so when it fails you’ll need a brand new cooler. You shouldn’t use this on any of the newer AMD processors as the miniature contact patch will not make any connection with the area above the core chiplets.As others have alluded to, the mounting mechanism is atrocious. The spring clip is similar to the ones used by Antec and Silverstone for their cheaper coolers, but it is operated from a higher position on the cooler base, which makes it very difficult to actually engage. The heatsink tilts up when only one clip is engaged, and that is a design issue (more likely Deepcool saving fractions of pennies). It needed longer clips but nobody cared. You need to make sure the motherboard is not in the case when this is installed, or you may fracture the board. Motherboard has to be level on a flat, hard surface and the second clip should be on the inside (facing PCIe slots) for a bit more purchase.The list of positives is limited – it’s the cheapest aftermarket cooler you can find, it’s reasonably quiet and the downblow design means the cheap VRMs on cheap motherboards will get a little bit of help from the additional airflow. I needed to spend as little as possible and the ‘Intel’ coolers weren’t floating my boat, and this fit the bill. You should really think about something else unless you’re saving for food.
2 people found this helpful
Pavan –
Using it from 6 months and its working fine.
ARUN NEGI –
I was skeptical about this product as it was just Rs 1330 and looked cheap. But looking at its size, four copper pipes and reviews, I went ahead with the purchase. Installation is not difficult, manual is easy to understand and minimal. Mine is a Lenovo proprietary motherboard but still it somehow managed to fit, though you have to remove the motherboard from the case to fit the backplate. The airflow inside my case is also congested.Performance:- I was unable to use CPB-Core Performance Boost (Overclocking upto 4.4 GHz) on my Ryzen 3700X earlier as temps were reaching 90C+ on stock cooler, so had to keep it at base 3.6 GHz to maint temps. After installing this cooler, the temps are never above 82C even on CPB mode. On an average they stay at 70 to 75C when gaming. Stress tests stay at 62-65C (power drawn by CPU is 90W) even after 15 mins, though its not a good benchmark for comparing temperatures. So i think it has easily made a 15 to 20C difference in temps. Idle temps are 35C to 45C, as such they don’t matter much for gaming.Cons:- At Rs 1330 you really cannot complain about anything. And as brought out earlier installation is not at all difficult. This was my first CPU cooler installation and that too on a proprietary Lenovo motherboard. So just go ahead and buy one to save some bucks.
Gaurav Das –
I got the two fan version with slightly thicker heatsink to pair up with a Ryzen 9 5900x. I would have much preferred a good Noctua cooler but it was impossible to find in stock.Installation was mostly painless, apart from slight confusion on which way the backplate was supposed to be oriented for AM4.The cooler works well and a full core extended Cinebench load doesn’t go past 83°C using the provided thermal plaste. This is quite acceptable temperature considering my ambient temperature was around around 35°C.The fans however are fairly noisy, and the especially second fan has a distinct whining coming from the hub area. Honestly the fans feel quite cheap and I don’t think they will last long.Disappointing consider even the cheap Cooler Master coolers come with better quality fans. The fans also remain audible under low load which make them doubly disappointing.
error 404 –
Easy to install, max temps with a 8600k 53°C, 36°C at idle
Kirti Muley –
good
Soumik Das Gupta –
You cant get anything better than this in 1500 RS.Best Value for Money cooler.
Hasib –
I ordered this Product thrice and at all three times I received Gammaxx 400 V2. Wasted 10 days and my system was unfunctional.
Chetan Prakash –
It is not easy to install. You have to refer youtube for proper installation. Wrong installation may cause to rise of cpu temperature drastically.
Chethan kumar –
Braket and bolts are not fitting in gigabyte am4 motherboard
joel –
Don’t buy gamemaxx 200 v2 if ur motherboard is am3+ it doesn’t support.
Prannoy –
Installed this on my 6 year old gaming pc. Took some time but very well engineered, way better than Noctua. Earlier temperatures would be 40-45 degrees when idled. But now, its around 25-30 degrees. That’s a lot of difference. If you want more cooling, I highly suggest you to tweak the manual fan control settings to 2500PWM. Noice level is very low. Close your eyes and go for it.
Deepak Kumar –
Bought this for my old AMD 6300 4 gbz but still beast CPU. was slightly overclocked from years on stock. I changed my cabinet so though should give it a try, and it works. for 100% load for 30 min straight, max temp was 44C.On Idle (CPU loan 1-2%), temp goes down to 20*C. which I never experience with stock cooler whatsoever, don’t go for expensive once, this will do the work.Side note: I had to open the motherboard and remove previous coller foundation and install new one, not easy installation so be careful.
Birja Bhanu Khati –
It cools more than any other cpu fan
Sayantan Kundu –
I give 3 stars for its bad packagingBut talking about cooler it is good budget cooler under budget,, at 35 degree room temperature ,, cpu idle temp between 39-40 degrees ,,on load it goes below 65 degree…
Soumyajit Saha –
Value for money and good cooling,temperature dropped around 15-16°C in 3300x….😊
Zaheer –
Excellent product.. Noticed 20 degrees less temperature.Before with stock cooler,Room temperature 30, Idle-48, Full load-74.Now with DEEPCOOL GAMMAXX 400 V2,Room temperature 30, Idle-40, Full load-56.
One person found this helpful
Indradeep –
Excellent product!
Chetan B. –
One of the best CPU air cooler available. Dropped my CPU temp from 70 to degree. Awesome performance at reasonable price.
Tech Deepak –
Color is very good
vishnu srinivas –
It’s do its job perfectly.. recommend this product
Chandan Kumar –
The best available in market. Easy to install. And temperature of cpu remain between 35 to 38 degrees C in ideal condition.
Bala J –
My CPU is close to a decade old, i5 3570 bought in 2012. The fan noise was too high since last 3-4 yrs when ever i played games, temperature hitting >90℃.This cooler fits properly on my old asus motherboard… But the clips are tight, so fins may get bent.This fan though reduced the temperature a lot, but noise is still a bit high and very audible esp if my celing fan isnt running…So yes this is much better than stock if you are gaming.This also helps reduce TDP and power as well. Led light is nothing special…and its a tight fit upon closing my pc cabinet….
S R. –
It’s huge but does fit in my case. Installation was easy enough although I would say you need to preplan it as the fan needs to be installed last.Temps: I never checked stock cooler temps so cannot compare but it works around 45c~50c when rendering a 360 video(11Gb).Noise: Its really really really quiet, more than the stock cooler I had for the LGA1151 socket.Absolute worth the money.
alex.jangam –
The contact surface area is circular and does not cover the cpu fully. But cooling seems to be fine, but need to test it with high performance.The fixer metal strip is bit hard to bend which made it fixing bit hard.
One person found this helpful
Lucky –
The media could not be loaded.
One person found this helpful
Pradeepkumar –
Good cooler
Dr.NMR –
today i install this cooler fan. my CPU temperature never cross 50 but earlier it is never below 65. i like this product very much. even on CPU stretching it reaches 65 only but earlier it is around 85 to 95. and installation are also very easy by using screwdriver another side of mount pin. over all i am giving 5 stars
One person found this helpful
Rothin Vijit Shaw –
I was buying a Noctua D15, had ordered it from MD computers… Only to realise that it won’t fit my case by 0.5cm. So i cancelled that. And looked for somethin cheap which can use for a few months before getting a bigger cabinet.. Well it turns out I don’t need one anymore..CPU with max load temp drop by 20-25degeesUsed to be around 75-85 and pc used to restart due to over heat..Now it’s 50-65 duing heavy loads..The inky downside is the blue fans it has, doesn’t really go with my whole setting other than that i saved 8k easy.If you want an aircooler which does and amazing job while keeping your wallet without a hole.. This is it.Chears happy fragging
One person found this helpful
kamal✅ –
Using on Ryzen 5 3600. temps with stock cooler (stealth) would easily reach 90c with just seconds of playing games. Replaced with this cpu cooler, nows temps reach 70c. Very good difference. Would suggest this, if you have CM NR200 case. Fits good but only with mesh panel.
Nishant Rana –
Good quality is great
Pankaj Singh –
Nice product.. easy to install …Decreases cpu temperature from 90°c to 65°cGood for mediocre level overclocking and low noise level even at high cpu usage…
Nithin –
Since this was launched recently there are no reviews online and I was skeptical. But the cooler size is a perfect fit for the NR200 and since the price is quite cheap for a 220W TDP cooler, I took a chance.My 5900X with stock power limits idles at 40-43C and does not cross 85C in synthetic loads or games. The ambient temp in my room is about 23C.This comes with the AM4 and LGA1700 mounting kits. For AM4 it was a breeze to install and the mounting feels very sturdy and secure. The included fan is very quiet up to 70 percent speed and moves a decent amount of air. There is pre applied thermal paste but I wiped it off and used NT-H1 instead.
4 people found this helpful
B.R.suthar –
Good
Kirpal Singh –
it’s good
Asheeq –
The installation is pretty difficult but once it done and you think about placing fan and your ram outer portion will definitely touch it if your board is micro-atx size which is common nowadays. So, I had to put the fan on opposite side which is near to the CPU exhaust fan on rear, they gonna create an opposite vacuum which I can’t do anything about it because my rear fan is galax vortex and it can only fit in one direction. But it’s okay since I get cool lighting effects on both leds mixing together. One major part you should take care of is the copper caps, it’s so soft that it can bend if you put finger on it on the mini copper valve cap as shown in the picture. Rest please carefully install or everything gonna be a cumbersome process. I have to remove the top fans to install this, and it took me 2 hours to properly install everything back because I have dust filters on top too. Important part does it cool the chip? yes, absolutely yes, it can reduce 10 degrees lesser than standard intel fans. checked it by using benchmark on OCCT software.
Ajay Singh Rawat –
at first when I installed this in my computer, i was expecting some magic to happen, like clowns and faeries but was highly disappointed when it just made my computer faster… oh well 4 stars anyway
Hiran K –
Excellent product. Reduced around 20-25 degree C from stock cooler of intel LGA 1155 K series processor. It leads to much difference in performance also, as it get hotperformance is reduced to cool it down automatically. Now steady 40-60C. Must buy for all performance oriented PCs.Easy to installComes with thermal paste. I used ArticSilentDownside needs wider case ~20cmWould like fan without led or go for RGBONE COMPLICATION – PACKAGING – THERE WAS NONE- JUDT A STICKER WITH MY ADDRESS ON STOCK PACKET. WOULD HAVE EASILY DAMAGED. BUT I GOT UNDAMAGED PRODUCT LUCKLY
One person found this helpful
Aritra M. –
Ok, so I am running a Ryzen 5 2600 in my machine coupled with a Gigabyte B450 chipset. I bought this CPU second hand from a guy in September and then wintertime arrived. it came with the Ryzen Stealth stock cooler that I have attached the photo with and even in wintertime, it reached around 75-degree Celsius temperature under full load sometimes when the ambient temperature was around 15-20 degree Celsius on average.As summertime approached, I come to see the heavy temperature rise in my CPU thermal reading and it was touching around 89-90 degree Celsius sometimes and the idle temperature was around 55-58 degree Celsius when the ambient room temperature is around 34-35 degree Celsius on average.Hence, I had to buy a proper cooler to end this high-temperature problem with my CPU. So I checked online a lot and in the budget of around 1500 INR, I came to know about this beast cooler manufactured by Deepcool. I read a lot of positive reviews online and as I do not overclock my CPU much I decided to go for it and it got delivered to me 2 days ago. It was pretty easy to install and I got it done within an hour after reading the manual.Now let’s talk about its PROs :1. After installing this Deepcool Gammaxx 400 V2 Blue Model, CPU idle temperature came down around 42-44 degree Celsius temperature, and under full load, it is touching mostly 70-72 degree Celsius at max.2. Cools very very efficiently, those staying in hot and humid areas and not having AC in their room should opt for this cooler without a second thought.3. It’s in a very basic and starting budget range for CPU Coolers.CONS :1. Hard to install in smaller motherboards, especially if you are installing it while the motherboard is mounted and installed inside the cabinet.2. the tower is quite big in size, so you need to have a big cabinet to install this.
JEET PARIKH –
Let me start with this.I am using a Ryzen 5 5600x which is more than enough for gaming and paired this with a rtx 3070ti(still costly but i got a good deal). Coming to the main topic of the review “the cooler” so this cooler is perfect and is next best to Aio if you don’t want to invest much. My CPU temp under heavy load doesn’t passes 65 to 70°c which is more but bearable(in my opinion). Since I don’t have good airflow in my case my idle CPU temp stays around 40 to 42°C which is still not bad but it could have been Better if my case had ample amount of airflow. Coming to Noise of the fan, let me tell you that you won’t even notice that the damn thing is running unless it is complete silence in your room.Conclusion:- it is awesome and if you tryna watch your budget go for this cooler, it won’t make you regret your decision, plus it is easy to install, A PERFECT VALUE FOR MONEY.PS.:- HOPING TO GET A CASE WITH BETTER AIRFLOW SO MY TEMP CAN DECREASE 🙂
One person found this helpful
somen adhikari –
I am really surporised by the performance my processor is giving after installing this new cooler and in standby the temperatures are around 20 degrees really amazing results seen by itMy processor Amd FX 6300before while gaming the temperature used to go 70 degrees and now it hardly reaches 50Really Satisfied.Thanks @Deepcool
Ramesh kanna –
Best cpu for enty level
Lokesh Kumar Singh –
That’s the product that I want
shrinivas –
Very good fan for cpu, buy
AQUAG –
Product worth the price an gets work done my pc was running 8 degree cooler as compared to stock cooler i7 7th generation.
the original techie –
It is better than already popular Gammaxx 400 cooler. This one is upgraded version with two 120mm fans and 20% larger heat sink.Using it with 3700x. Upgraded from wraith prism and idle temperature dropped by 5 C. Now idling around 38 to 40 C which is great.Very low noise as well even at full speed. No fance RGB but just basic blue light which is ok for me(not a big RGB fan).You can use the provied thermal compound but good for only one application..Attached screenshot is with 3 youtube streaming hence around 45.. hardly crosses 60 under load.
2 people found this helpful
Akhil T Sujath –
Good product. It is very big
Anil dutt –
Great heatsink my pc cooldown
prateek saraswat –
garbage fan, installing it almost broke the fan socket on my Gigabyte GA970 motehrboard. So sufficed to say, it doesn’t sit well in the AM3+ fan socket. The fan is quite, and the heat sink large but NO PWM, means that there really is no use for it, unless your primary CPU fan fails and you are looking for a cheap replacement. Heat sink compound does not come pre applied. and the one they give is quite useless.
3 people found this helpful
Vikram –
The media could not be loaded.
I’m using Ryzen 5 3600 with stock cooler for a year and planned on upgrading to a after market cooler without spending lot of money so I choosed this deepcool gammax V2 blue cooler which was very cheap and had good reviews so herw my experienceMy cabinet is Deepcool mattrexx 55 mesh 4f which is very air flow cabinetStock cooler – Idle – 50 to 55 °c100% load – 85 to 95 °cwithin a secondDeepcool gammax V2 blue -Idle – 40 to 43 °c100% load – 65 to 70 °c even after 10 mins of stress testGo for it 😃😃
One person found this helpful
Steve B. –
I was very worried about the temperatures with my first AMD build. In games like FarCry5, the temperatures reached 95 degrees C and remained constant. After wasting too much money on 120mm Case fans and literally cutting my front panel open for better air circulation, I only turned down the temps by 5 Degrees. Almost 5 months later, after some research and realizing how expensive AIO Cooler are, I bought this cooler and all my problems were solved.In GTA V where my temps were always around 85 degrees, were now lower than 70 Degrees C.I’ll definitely recommend this cooler for AMD Toasters.The installation is pretty simple too
7 people found this helpful
Krishan Bhardwaj –
Very effective solution. Earlier my cpu fan used to be running at top speeds and creating noise. After this installation everything had become quiet
Gaurav –
Keeps my Ryzen 3600 overclocked to 4.2 GHz @1.1875Volts under 60° while gaming and 70° while all core load. The fins are way too fragile. Fan mounting is good, fan perfoms very good. Just can’t bare that uncontrollable blue RGB.
Rajan –
Cheapest product in this category.Reduces cpu temperature by apprx.10 degrees (compared to stock cooler)Even after using thermal paste that with it.Warning-Remove the fan first (open its screws) then assemble. Otherwise you may break your MB or fan. Refer youtube videos for installation.
One person found this helpful
Antriksh Sharma –
The product in itself is of premium quality, the temp of Ryzen 5 2600 with stock cooler was reaching 80 C on idle (the paste was also dried) I replaced it with this cooler and now temps never go above 60 even on stress test, considering I live in Delhi and temperature these days is 40 C.One thing I want to stress upon is that the installation isn’t easy at all, if you apply the paste on CPU and then try to place this cooler, it will slide here and there with very little push, which made the paste drip out to the CPU holder, fortunately it was not much but it continuously annoyed me while installing, so make sure you actually apply only pea size paste and not more than that, and take help of someone else to hold it in place.
One person found this helpful
Hruaia –
My 9400f Reach 75°C on intel stock cooler, with this cooler the max it reach was 58°C and the fan speed was around 80%. I was impressed.I have two 120mm fan exhaust at the back and on the top and they sits quite close to the cooler fins, maybe that helps as well.3 120mm fan intake at the front as well.I’m unsatisfied with the packaging.The Box was opened and the cooler was placed inside without and cushioning, Im luck that it didn’t get damaged in the shipping.
Dipak –
Little hard to install if replacing existing CPU cooler, but if you remove the MOBO from the case and then install it not so difficult then….and certainly the cheapest 120 mm CPU cooler with 2 fans provided……Use good thermal paste though……….
Lalit Gunjal –
With this cooler temperature of pc is stable near above 65°-70°.
a –
As I said above, good cooler for its price but worst packaging by seller, mine is missing thermal paste, could be old poorly managed stock. thinking of replacement
Tarun –
1) MASSIVE TEMPERATURE DROP2) EASY TO INSTALLCHANGED FROM AMD STOCK COOLER TO THIS ONE, TEMPERATURES DROPPED FROM 95 TO 75 ON FULL STRESSFULL VALUE FOR MONEY RS 1400
Ankit Negi –
Great fan….idle cpu temp at 42 and cpu package at ~47(+-1) after fan installation cpu idle at 32 and cpu package at 34(+-1).happy with the purchase.
Jose Thomas –
Awesome CPU cooler, My PC (Ryzen 5600x) never crossed 70C after installing this cooler, (I’m using for development purpose, tested performance by running cinebench.)Pro: Awesome cooling , CPU can run on its full potential, 100 % Value for the moneyCons1. No Way to switch off Blue LED,2. Bit Noisy when fans are blowing at 100%3. There are few sharp edges, need to be little careful while installing,
Tekpedia –
Awesome product. Temp dropped by 15 degrees. 1 star because of worst packing by seller.
Shiva jadhav –
Good
Amogh –
Easy to install. Works perfectly for AM4 socket. Paired beautifully with Ryzen 5600X.Stock Cooler :85 CGAMMAXX 400 PRO : 54-61 CHats off to Deepcool.
One person found this helpful
Dharmendra kumar –
The media could not be loaded.
Good product
Prabhjot –
it does its job.. but bit big insize …
Rahul –
This is the best cooler one can get at this price range, that too with two fans.This cooler reduces the temperature by 20-25 degrees easily on the stock cooler.Instructions could have been more detailed.
Psm –
Way better than arctic IMHO and almost equivalent to FUMA and the likes.Idle temps are always <40c in my lancool 215 max load temps are 65-75c when running prime 95 and cinebench.Very silent – can’t hear a thing. Could not ask for more.Only minor issue – the clearance needs to be >164cm (mine is 166 so there’s a few mm gap) and the ARGB pin is a 3-pin connector – not a 4 pin. This thing is basically a mini assassin III.
4 people found this helpful
Paras K. –
Gammax 400 V2 is best CPU cooler I have ever seenI have a i3 9350kf running on 5ghzThis processor heats upto 100° and starts to thermal throttleIt had 70° when idle these are stock cooler tempsUsing this cooler, when gaming and full stress, it never went above 75°Idle temps were 38-39°Also some people said it’s hard to install bla blaIt’s not at all hardEverything is easyAnd now I am ready to overclock it to 5.5GHz
Marc –
Wasn’t easy to install
Kaushik R Nath –
Just amazing
Gloomy –
If you are getting this to cool your intel 12th gen CPUs then you’re screwed. Deepcool states that newer units will include the LGA 1700 kit but it’s been over 6 months since the launch of the 12th gen CPUs and I have yet to find the AS500 plus with the mounting brackets included. This applies to the ak620 and a few other coolers from Deepcool that I know of. Be warned that without the necessary mounting hardware, you will not be able to install the cooler on your CPU.I completed the free lga 1700 kit request on their site after sending all the necessary proof of purchase as requested, but it’s useless. When I asked them about this, they linked me to a site where can purchase the LGA 1700 kit seperately for about rs. 250. Even if you are fine with, get ready to wait days-weeks for it to arrive, depending on where you live.Deepcool, why do you claim you will send us a free lga1700 mounting kit if you’re a 12th gen owner and your box didn’t include one if you’re not gonna do it? Or is that valid only in countries where most gaming reviewers are based in? All Noctua and Arctic coolers have been coming with the LGA 1700 bracket for some time now. What a waste of time.Edit: I got a replacement and the new one looked like it didn’t include the 1700 kit but it did. The manual you get is still the older version and there’s no indication of it. The newer back plate is compatible with both lga 1200 and 1700 sockets, you just have to adjust the screws on the corners to shift it from 1200 to 1700.
3 people found this helpful
Junaid khan –
Best CPU Colling fan at this price,Use it with I3 or I5 processor.
dhananjaya –
The media could not be loaded.
Iam using this cooler i7 10700k good working
Nishant Singh –
I have Ryzen 5 3600 with MSI B450M Pro VDH Max and on stock cooler it used to get heat up to freaking 97-100 in summers .I got it a month ago and its winter now hence the max temp I got till now is 53 .I’ll edit it in summers again.
joe –
NAA I would still like to stick with my good old coolermaster hyper212 plus cpu-cooler I bought way back in 2010. The fan RPM is 1500 – 2000+ and it helps keep my 11 year old nuclear reactor processor ‘phenom 2 X4’ temp hovering from superb 45-49 during full load and a 35-40 during the idle
Harshit –
came with lga 1700 bracket support out of the box.I’m running a Intel 12700 in a o11 air mini with glass panel closed. There’s a MSI RTx 3070 sitting right underneath this cooler. 2stock 140mm lian li are installed at front in intake position and a 120mm stock at back for exhaust where ar stock fan installed at cooler in intake and all are in pwm mode and curve calibrated to silent operation (50-60% duty cycle till 60 degree), My pl1/pl2 boost settings are unlocked and cpu pushes through 170w TDP at msi mortar b600 board. Running cinebench 23, I have all cores boost around 4.5ghz and max temp never went above 79C and scored 21500 at multicore. The fan curve was set to around 2000rpm at max above 70C. It idles around 35C. In firestike test cpu maxed out at 60C. In realworkd tests cyberpunk, red dead redemtion, csgo , doom eternal it never cross 62-63C. Before this I used stock intel cooler for 2 weeks and temm were 100C withing 10 sec in cinebench. A week before I got this cooler, I used it with master gel maker paste. I will upgrade to noctua AF fans for case and Noctua NF-F12 iPPC 3000 PWM for better more airflow and especially quieter operations.History for buing this cooler:Got corsair 150i capellix argb at killing 9k Deal but did a rookie mistake of not checking compatibility of 360AIO for my case where any 280 aio or 120×3 fans are supported at top. Anyway ordered this as a temp cooler as I was not interested in 2400mm aio and 280mm rad were way costly 12-15k.But after using this thinking that I saved huge money and never gonna need aio in future for at least non-k chips.
5 people found this helpful
PlankMx –
The installation is very easy and straight forward and drops at least 10 degrees against your average stock cooler. Even thought the blue LED is slightly jarring, you can always replace it with an ARGB fan. It is a PWM fan so it stays silent when load is low. Highly recommended for APU and budget builders.
Aneesh –
I had built a pc with a Ryzen 5 5600x, Rx 6600xt on a msi B550 mortar Motherboard, with the stock AMD cooler, when i did benchmarking using cinebench the max temp would reach 85c, so the hunt for an after market cooler began, then decided to go with the gammax 400 v2 at Rs 1600 as it was the cheapest value for money option, was skeptical at first as there were some mixed reviews, after installing i ran the cinebench multicore test now the max temp doesnt cross 59c very happy with the purchase, also while gaming the temp stays around 53 – 54c before it used to touch 80c on the stock cooler, if you have a stock cooler then go for it, will definitely improve the temps significantly provided you apply the thermalpaste and install it properly, i used the Corsair thermal paste that i had instead of deepcool one that came with the cooler, i used the pea method to apply the paste
sivasurya s –
Great value for the price . Far better than intel stock cooler , More than 30⁰c difference. Would recommend this product.
Brijesh –
Thodi thodi karta hai or….. Kafi achha hai but sub kuch dek lena aapna cup space motherboard space tab hi Lena yrrr nahi to problem ho sakti hai…. achha hai but fan ❤️
Anindya mandal –
The media could not be loaded.
quality product.rs-499. Intel G31 modher board good service.
Sagar Das –
Best Budget Air cooler. Ut can handle even 5900x and 5950x. Max temperature goes 75°C with Aida 64 stress test for 30 min. 😍
Amalangshu Bhattacharjee –
The packaging was not upto the mark. One corner of the material was slightly bent. Although the product is installed and working.
MOHITMARSKOLE –
FAST DELIVERY EASY PAYMENT
Mukund d. –
Good product worth the money
Sk Asif –
Good quality product within budget..
Lamphrang Ryntathiang –
It’s easy to install especially for Intel and I changed and added the fan with Deepcool rgb fan which look absolutely stunning. It matches with the other out take fan.
One person found this helpful
K KUMAR –
Nice Cooler for processors. Provided attechments to fit on AMD or Intel chip. Noise level is nothing. It’s liquid cooling system processor keeps cool at environment temperature.
Mishal –
TL;DR: Go for it!If you have a Ryzen 5 3600, you know how awful the stock cooler is.I plonk this in, temps are now idling at around 45°c, compared to the 60°c+ I used to get on the stock cooler. I stress tested using CPU-Z at full load for 30mins and it never crossed 75°c! Whereas on the stock one it’s gotta reach over 90°c and eventually thermal throttle. Mind that this was on Stock CPU Clocks.Installation was easy, this is my first custom cooler btw.Packaging was fine too.Overall good Cooler.The only con I can tell you is that there’s no way to turn off the Blue LED light, which can get annoying if you’re gonna use it at night (the Blue light filters you use on your phone and pc would be useless lmao) but that’s about it.Make sure your case can fit the cooler as it’s pretty darn big.
One person found this helpful
Rafick Laskar –
Really Great product….
Prannoy –
Installed this on my 6 year old gaming pc. Took some time but very well engineered, way better than Noctua. Earlier temperatures would be 40-45 degrees when idled. But now, its around 25-30 degrees. That’s a lot of difference. If you want more cooling, I highly suggest you to tweak the manual fan control settings to 2500PWM. Noice level is very low. Close your eyes and go for it.
Adithya –
I’m running my Ryzen 5 3600 at 4.3GHz OC, 1.25v easily using this cooler, with temperatures going no higher than 85C on LinX stress test (one of the most demanding stress tests to exist) while with stock wraith cooler it easily hit 105C even in 4.2GHz 1.2v. Installation was a bit painful and I got my fingers slightly cut by the sharp heatsink, so be careful while installing it. There is a bit of coil whine at full speed but I’ve already gotten used to it now.
Abhishek Riwan –
INSTALLATION TAKES SOME TIME BUT COOLER IS GOOD..
lalit –
Deilivered a product with torn box with a plastic tape on it. Dont buy this i got one wire missing.
Akshay Yelve –
Loved it. My stock cpu fan was very noisy and couldn’t keep temp in control. Deepcool fan is amazing, absolutely no noise and also keeps temp in control. If you’re looking for cpu fan, go for it.
Avishek Naha –
Awesomr Product. No need to install Liquid Cooling if you have this product.
Sixxasuxx –
Reduced 10 degrees off stock cooler. The initial installation is a bit pain due to retention clip but once its installed Its silent and its job very well. But keep in mind, while it will keep your processor cool at stock, It won’t be able to handle any worth while OC.
2 people found this helpful
Vineet Pannu –
Hello guys I am writing this review after using deepcool gammax 400pro for one week. I m not overclocker i do casual gaming. My cpu is ryzen 3600 . On stock cooler in indian summers my cpu never use to overclock to 4.2 ghz due to temp . Before deepcool my ideal temp was 55 and in gaming 84 degree. Room without ac and water cooler. After using deepcool gammax 400pro ideal temp is 39 to 45 and in gaming 62 degree
One person found this helpful
Pravin Vibhute –
If you want or replace the stock cooler and want great cooling in budget, go for it. I have added a photo that compares the size of this cooler with the Intel stock cup cooler. Its much bigger than the stock cooler. About 5 times more cooling surface area. Looks very attractive and very very silent operation, even at 100% speed. Though you can adjust the speed, at 40% speed its completely noiseless.full 120mm fan size, opposite to other coolers where you get only 92mm fan, covers more area and works silently.Build quality and the fitting screws are very easy to install on almost any system. There are two different size steel fittings for AMD and Intel systems. Both are provided in the box.Thermal paste is also provide in the box. Overall it is more than sufficient for most of the PC users.Temperature dropped from 45 to 32 C on daily Non gamin use.
4 people found this helpful
chayakumar –
It’s an budget air cooler for gaming pc,If you are using mid range then ok to purchase this . thank you
CRYSIS CO –
Bluebug –
Got it delivered in 22 hours only. The tower is huge and heavy but it does the job. The CPU temp is not going above 50°C.The fan’s have blue LED built in. Looks cool and keeps cool. 👍
Chitraranjan –
Pros:1. 10-15°C down from stock cooler2. Easy Installation. No need to remove the motherboard if you are using it in a already built PC3. Value for money.4. Low noise levelCons:1. Installation manual is totally useless. Seek YouTube for installation.2. Single light
3 people found this helpful
sumanth koriwad –
getting 40 – 50 degrees temps.The gaming experience is extremely good.go and buy without any doubt.
PSamAZ –
The fan was delivered on 22 Feb. 2016, had placed an order on the 19th and was promised delivery by 01 Mar. 2016, so shipping is quick! The fan is great and comes ready for AMD sockets. My stock fan on the Athlon 2 X4 640 had gone out of whack and was always running at incredible speeds with loud noise. The machine could be heard from anywhere in the house if it was on. So it was that loud.. and despite all the speed and noise the core was running average temperatures of 40C and 60C under load. The ambient temp. being around 57. Now with the new fan installed there is literally no sound unless you are very close to the PC. The average core temp is down to 29C and 55C underload with ambient temp of about 45C. So all in all the cooler is a good deal. Installation is not as difficult as some reviews seem to find. I was able to get in and install it in under 10 mins without taking out anything besides the stock cpu fan.
2 people found this helpful
sumit kumar –
Nice products
Shariq –
Package received without any seal it was open , device is working properly, according to fan manual ther should be extra attachment for extra fan which is missing in 🙁 so I future If I want to add extra fan I could notAbout temp I am getting 35 on idle I have used artic Mx series Thermal compound
Khan S. –
Nice product quality very high
kona sairam –
Bought this for my ryzen 5 3600.Idle temp was above 55 before installing and oc temp was reaching 90 but after installing this my idle temp never reached 50 and over clocking temperature never reached 70.You can go blindly if you are using a ryzen cpu just like me. Just trust me! This is too good for it’s price!
mulkesh –
Very good CPU Fan….
nirmal k. –
Very good product take it specifically for AMD processor
2 people found this helpful
Balu –
Good
nandish –
Great product
Shubham W. –
Really decent Cooler for the price but you definitely need a better case with Fan Clearance of 155mm. cheaper ones are deepcool mattrexx 40 series. But my temps dropped to max 75 c after switching case and cooler from 90+c above (with intel stock cooler and bad case). So go for it but make sure you have clearance in the case!
Mohammed Aslam –
I have got a Ryzen 5700G with stock cooler, while rendering my 3D works the temperature always shoot up to 95°C and it will thermal throttle.After I installed this, while rendering it the max temperature is always at 75° to 80°.We can hear slight fan noise when the CPU is at 100%. But it is silent every other time.If you need a good CPU cooler don’t look for anything. This provide best bang for the buck value.
Kishore Sandilya –
This is an awesome cooler. Value for money
Ashish –
Product are good but thermal paste is Missing so i have waste Extra Money and time
Ankit G –
Undoubtedly one of the best coolers at this price. Took my intel i5 from 70 to 40 degrees idle temp.
Rahul S –
Good Product. I am running a ryzen 5 3600 which isn’t overclocked. This cooler kept temperature below 72 deg C at 100 percent load which was reaching as high as 82 deg with stock wraith spire cooler. The ambient temperature is 25 deg. Dont forget to check your cabinet case width as the cooler is almost touching my glass panel.
25 people found this helpful
Praveen P L –
It can’t handle heat of quad core or more like cpu. It’s just for old models like Intel lga 775 and amd am2,am3 sockets. It is big in size and not good for micro ATX model cases. Supplied bracket is good for Intel CPUs and u need existing bracket for amd CPU.Note: thermal paste is available with package.
Sb –
Product is very good. But the packet is opened.
One person found this helpful
zubin mujawar –
No cooler available at this price point and performance and quality level. Reduced my Ryzen 3600 temp from 40° to 32°c over stock AMD cooler.Bright LED light glow and works pretty much silent even on loads. Avoid buying the two fan version V2 Pro, it’s actually the same but costs 1200 more than this Gammax 400V2
GP –
It increased the noise level but decreased the temperature from 95 degrees to 70 degrees during 100% load for my Ryzen 2700.But my guess is noise level can be brought down by installing a low noise after market fan as 120mm fans are easy to find.
Rakhi Sharma –
I loved it very it did so much of cooling that my idle temps with stock cooler was 45-68 and gaming and full load temps were 78-94 CAfter getting this cooler it never reached abover 75C also my idle temps are now 29-34C and gaming temps are 54-67C .
FJTech –
Best budget cpu cooler… reduce temps by 20°cGo for it… grabbed it for 1200rs and its a bang for bucks
Ajay –
Best for that Price
Sagar –
Working perfectly.. it’s bit bigger then all other coolers.. and installation is kind of tricky becouse it’s have so many different attechment
Sandeep Singh –
This is amazing coolerEasy installation and temperature not going high so pc running smoothly
anand –
Best
One person found this helpful
DalazakMudassirKhan –
The media could not be loaded.
I’m gonna be honest with you, i haven’t got much experience with pc builds but this is the cooler that i went with to pair with my i7 4th gen. The stock cooler that i was using was completely heating up the pc hence decreasing the performance of the graphic card and other pc components. This fan is a single colored fan but yeah.. Comes with DeepCool’s Thermal paste and standoffs which can be used with AMD processors as well. The fan barely makes any noise and it even keeps the temperature of the processor under limits which helps in longer usage without any pc bottleneck, i’d definitely recommend you to go with this cooler.I did forget to mention that it is pretty easy to install, comes with a manual which clearly shows you how to install it with your motherboard, be a LGA1200, 1151,1150 or an AMD AM4, AM3+ or Am2+( and yeah, don’t forget to remove the fan before the installation of the cooler, it kind of gets in the way of the ram sticks, you can install the fan later on). You can find tutorials on YouTube on how to do it. It is pretty simple. Definitely worth 5 stars.
One person found this helpful
Anando –
good product , not too easy to install though , need to take your mother board out .
jeeva k. –
If you’re are planning for matx motherboard, it might interface with memory module, it looks good,but very difficult to install if you already installed the motherboard into the case, it helps to keep the temp by 10c to 15c lesser than stock cooler, it’s value for money, it’s very tall, so check your cabinet size before buying it
siddesh –
thermal paste is pre applied to the heatsink so no need to buy thermal paste, if u want then buy coolermaster or any repuated brand thermal paste.to remove existing thermal paste on CPU use tissue paper and use small amount of sanitizer,since sanitizer contain isopropanol alcohol.package contains all the brackets u need for lga 1200,lga1700 and am4.easy to install but if u have large gpu then u need to remove gpu then u can install the fan.stock fans are not worth it because it degardes the performance in a long run.for mid range cpu like i5 12400f and ryzen 5 5600x is sufficient,i5 12400f on idle 32-35c,on load around 50-55c (3 in take fans 3 exhaust fans).2.5k is worth it.Go for it,even it handles ryzen 5 5800x and i7 12700k
2 people found this helpful
dilipvarri –
Its a value for money
Vipin Yadav –
Easy to install and Giving cool breath to my i5 4690k ..
Rohit –
One of the best air cooler for CPU. PERFORMANCE is great, Look is also CLEAN and PREMIUM.
Brijesh Rathod –
I am using this on my i5-9400f and it’s temperature gets too much high special in summer, Before on Stock intel’s Stock cooler it was reached 98 degrees in just 5 minutes of 100% cpu load and now with this cooler it’s never get any higher than 70 degrees even in continuous usage of 6 hours on 100% load.So as my experience with this product is that it’s does pretty good job at cooling at this price point.
Vikas kumar –
The media could not be loaded.
Mast hai bro
Bhawana s. –
Best cooler for ryzen 5 5600x… I have used it for almost 2 months and my cpu temperature never went above 75°…. But you are gonna face some problems install if especially if you have small cabinet ….. And it is too fragile you can easily bend it with your bare hands so be careful!! Read manual before installing!! And always mount fan at last ( when you done pc building)
Anurupa Sen –
Hey guys very nice cooler. Bet it’s a warning ⚠️for MSI b410 m A pro motherboard user don’t buy this it will not pair with ur pc .
Aravinth Sundaram –
For a month I searched online for a cooler, since my work tempts to hype the temperature of my cpu and the stock cooler is not sufficient enough to keep it down. Comparatively this product is far better than the stock one. Easy to install, low cost, better performance and works for me well.
Sushant verma –
At only ₹1350 it is a great value for money buy, keeps processor cool, at par in performance with hyper 212.
Arunraj –
Quiet, Very Easy to setup, 15% reduce on CPU temp.
One person found this helpful
Deepak –
Evrything is alright working fine but the thermal gel supplied with it was a bit watery
Balchandr Mahajan –
The media could not be loaded.
It’s best cooler in budget, it reduce around 15 to 20 degree best cooler for gaming.
Sandeep –
I was not expecting this much of a performance difference between my stock Intel cooler and this. This is absolutely mind-blowing. I thought the heatpipes were pinched at the top and damaged, but apparently it’s normal and you don’t need to worry about it.Here are the statsCPU: i5-2400 @80W measured outputIdle: ambient+10cFull load: ambient+20c (side panel off), 25-30c (panel on)Yes you heard it right. Just +20c, and the fan is not even at full speed. Although even at full speed, fan is pretty much silent and my case fan is louder. The performance is equal to a Hyper 212 at half its price. I’m not a big fan of the unchangeable LED though.So if you want something that’s pure performance, go for it.
Kiran kumar c k –
The media could not be loaded.
One of the best budget heatsink.
bell –
To those who want function over form, look no further. Just get this. It cools the CPU excellently. The 140mm fans work great in cooling and pushing the air out of the back. But be aware that this is a tall cooler (165 mm), and you will need a cabinet with CPU clearance of at least 180 to 185 mm.Note: Fits in the NZXT H710, Antec P120 etc.Pros:extremely silent.excellent CPU cooling.Looks amazing.Massive 140 mm fans.cons:a tad bit expensive at 8k.tall at 165mm, or 175 to 180mm with a 3.5 to 4 inch tall RAM sticks.Does not fit Cabinets with width 210 mm, you will have to use it with side panel open.No RGB fans (stock).(The RGB junta will be disappointed)
2 people found this helpful
Sourav –
Super
Nakul Sharma –
Very Good Cooling except its difficult to install. I had to reinstall the motherboard with the fan in the cabinet as it was very difficult to install while motherboard was inside the cabinet.Else it has very good cooling and it also passed the stress test.
Subash S L –
If you still have a mobo with LGA 1155 socket look no further. This is an awesome cooler for your CPU with whishper smooth functioning and absolute ease of installation. The cool soft blue light is the icing on the cake. The current price is also a good deal. The is is my second Deepcool CPU cooler that I have purchased, the earlier one was the Deepcool ICEEDGE 400 XT for a 1155 / 1156 socket. This cooler is no longer available but the GAMMAXX, which is even better, is available. Go for it.
Jay –
It work’s like peace, yes its true, I have attached the b4 and after screenshot of core tempreture, you can c how much heat is reduced,, thanks deepcool, almost 50% heat is reduced
shivam –
Excellent best budget cooler temps dropped from 90°C to 55°C on ryzen 5 1600
nikhil v. –
never crossed 82c. best cooler under 2k. worth an upgrade.
One person found this helpful
Nowie –
Temps reduced from over 100 C to less than 40 C. Superb.
Bisan Sau –
totally worthy got it for 1k only. It is performing much better than ryzen stock cooler, at 100% load temp of my Ryzen 3500x goes upto 67 degreeC but before it used to hit arounf 92 degree C
kamal pal –
Overall very good product. Never rise temperature.
Manash boruah –
Very easy to install, i have installed it without unmouting the motherboard fron the case.keeps ur cpu cool even in high usage
Kindle Customer –
An excellent cooler. The temperature of the CPU with Intel stock cooler was around 75°-80° C.But after replacing with this cooler the temperature dropped straight to 40°-45°C. It is also a very silent cooler.
Varma DN –
Very nice Fan. Very quiet even while playing games. I have assembled my CPU with Ryzen 9 5950X Processor that which needs more dissipation. So I prefered this Air Cooler with Dual 140mm Fans to more push out more air. Prefer this only if you have enough space in your case.
SR –
Average performer but as it doesn’t break up the bank it fine and cost effective still don’t expect miracles my cpu temp hover around 76 degrees
Diy-er –
Better buy a zebronics or something instead of this. I removed a cooler master because its fan went noisy, but this one died in 2 days. Now i dont know what to do with this. Not worth a return? I will see if i can get it back.
One person found this helpful
suji –
Very minute Change in temperature variation between 5 to 6°
Srirammannem –
Very BIG SHINK, SUPER
Satyajit Singh –
Before its 95°c . Now 75°c . Go for it.
Dibyendu Joardar –
Excellent device and works as it described. On stress test with default fan, my cpu temperature was hitting 100 degree and with this device it is below 80 all the time.
N –
Nice
Ayush TRIPATHI –
Just go for it it will reduce your temperature to almost 5 degrees it work
Ajay Verma –
Great thermal levels runs at 70C at max load. Down from 90 with stock cooler.Hard to install with an am4 setup. Really annoying blue light, as my case has side glass. I had to cover it with a cloth.
thesigmaguy –
I have installed it on my Ryzen 5 3600. I have stress tested my CPU. Max temperatures recorded was 79 Celsius.Only CON is we can’t turn off the Blue light, which is pretty irritating for me. Otherwise, I would have given 5/5 for this.
One person found this helpful
NIRMAL KRISHNAN –
The media could not be loaded.
Best value for money product,My amd stock cooler temperaturesIdle: 45cLoad: 85cGammaxx 400 v2Idle: 36cLoad: 56-58c
One person found this helpful
Sandy Rawat –
Good cooler. But price is increased. Cheap in Mdcomputers.in
Vinay Rajput –
If you have a stock cooler than get this cooler without even thinking twice. Results are Awesome. Installation is a headache , if not installed properly, u may result in damaging the motherboard.
Prashun pareek –
Nice cooler, I have installed it over my i5 10400 and even at 100 percent load it doesn’t exceed 60°C.
Manju Sharma –
Everything else is great at this price. 8-10 degree difference against AMD stock Cooler.
Moideen –
ഞാൻ ഉപയോഗിച്ചിട്ടില്ലറിട്ടേൺ എടുക്കണം
Bikash Bhowmik –
Cooling is much better than stock cooler of amd. If you do overclocking then you go for liquid cooling.For 8to 9 hours playing games this cooler is okay.
Khalander –
Really good fully recommended anyway the cooler performs way better then other products
Wasiq –
Its Good Making My cpu FX6300 Really cooler than before…….average cpu temp is 40
Saurabh Guttedar –
It’s been more than a month since I was using this heatsink and it’s fan, I was happy until today the fan caught fire and smoke out of nowhere.I saw the blue light of the fan turn purple and smokes were coming out of it with a plastic burning smell or far worse.The service centre is far away, I don’t know what to do now.Also, there’s no burning smell from PSU, it’s only from fan cause I seen it and can even smell only from the fan.
2 people found this helpful
Shreejith Nair –
Its a decent cooling fan. Provides 5 to 10 degrees lesser CPU temps than stock cooler.THE BIGGEST CON of this product is that its really really difficult to install..Better have really strong arms else installing this becomes a two man job.
bala –
The fan is too big when compared to default fan type for Intel CPU. They have given the thermal paste and the accessories to fix the fan on the motherboard. Since the fan is too big so it may not suit for some cabinets which has cooling fan on the side panel.
Geetha Yuva –
I have doubt while ordering this cooler over Antec A40 Pro. But it’s really does it job. Before my CPU get heated up pretty fast & normal working temp is around 55-60. now my cpu working temp is around 35-40. Installation also easy but you need to remove the motherboard from the Case.
Aadil S. –
I had a bit of doubt that why this fan costs so low while the rivals lime Artic Noctua or Cooler Master costs nearly double the price. But I took the risk. I was surprised to see the performance. My Ryzen 5 3600 which on stock cooler use to have 75 C as idle temperature and reaches 95 during gaming and other and now remaining at 60 C even in all core peak load.It’s an awesome product just go for it.
YrKrishna –
The product is good.Does well in cooling the cpu.quite better than stock.But u need to take your time while installing it.Best way to install this is to remove the motherboard and then install..
Blue AG –
This model described on offical site as it have LED build-in, but here the LED ports are empty..Anyway working good… Comes with solder paste… Low noise…
sambit kumar prusty –
easy installbest thing is it works like beast at this price range.
Ashley –
Good fan but can damage the cpu socket if not installed properly. Box does not give proper instructions.
Sonu kumar Suman –
It sounds kir kir at above 70°CNormal’ingame temperature reduced by 9 or 10 °CWhile gaming it runs at 63 64 degreeBut above 70 it sounds like hell kir kirrrrr sound
One person found this helpful
Beerender Thapa –
I most definitely had tough time installing the Cooler alone. Take the Mobo out of the case and Install the Cooler. Have someone to assist you wile installing the Cooler which will be more convenient. I’m not sure about the temperature if it helps cool down. I bought i5 9600kf CPU. I needed a cooler for that. Just directly installed it. I did not test with stock cooler to tell the difference.
Alexander –
Its pretty good,quite and pretty sure works with most motherboard its quite tall so try to get a big cpu case for it
Sahal –
Works better than expected temp on load down from 103°c to 64 Max
Jacy Ghosh –
Those who r wondering will it support lga1700 motherboard or not .yes it does support lga 1700 i am currently using it on my i5 12400f! With msi mag motor ddr4
3 people found this helpful
Ishan –
First of all 1 star for packaging. Very poorly packaged and i wonder how it made to my city ‘Pune’ located in maharashtra, with such poor packaging while it was sent from Kolkata. Though there we’re no damages to the product. Completely functional product delivered.I had a doubt whether it would fit my Micro-ATX Motherboard, but after installing it, it did fit but touches the ram. Though that is not a concern as it does not put any pressure on the ram.This product does not come with any kind of thermal paste on it, so you better order for a thermal paste seperately.It does the job of cooling the processor perfectly so for average gamers, this is good.
One person found this helpful
Shriom Manerker –
great for the price, bought ryzen 5 3600 temps from 95 degress max to 78 degrees max , these are temps with 4.3 ghz overclock on all cores at 1.298 v
NEWNSTORE –
The idle temperatures of AMD Ryzen 5 3600 were around ~52⁰ and hence I thought about having a better CPU cooler. Since I was not into gaming or overclocking, I felt GAMMAXX 400 V2 will do the job. As the temperatures denote, it does the job, but not like a ~15⁰ difference as I’ve seen in some reviews. Under load, there’s a difference of ~10⁰ max between stock and GAMMAXX 400 and when it is in the idle state, maybe ~2⁰ difference max. However, the system became quieter, it makes less than half the noise compared to the setup with the stock cooler. (Yes, I’ve done some minor fan tweaking in the fan control, but it was only possible because of the cooler’s performance.) Yes, I was expecting a much better result, but for the price, I guess it does the job fine.
One person found this helpful
Harman S. –
Dropped my i7 7700 temps by 15-20°c while not even maxing out fan speed, so thats good.No issues, good quality fins and pipes, quiet fan.Only issue i had is that it was i didn’t get extra fan clips for installing the 2nd fan in future and the cardboard box of the cooler was not properly handled in shipping.
Haider –
Nice productI m using on ryzen 3 3200gStock cooler – idle temp(45-50), 3 minuts load(94⁰C >)Gammaxx 400 v2 – idle temp(38-45), 15 minuts load test (67-70⁰c)
Ajinkya –
Amazing cooler for gamers. Easy to install.
Vishnu M Bhatt –
I’m using it with the AMD Ryzen 3 3200G. I’ve been using the stock cooler since I built the PC a year and a half ago. The stock cooler is pretty much good enough for most tasks. But it has its limits and would throttle the CPU if I do heavy tasks like video rendering and photo exporting.Temperature ComparisonStock Wraith Stealth Cooler idle temperature: 30 to 35 degree CelsiusDeepcool Gammaxx 400 V2 idle temperature: 29 to 32 degree CelsiusStock Wraith Stealth Cooler max load temperature (With Precision Boost Overdrive; PBO off) : 80 to 87 degree CelsiusDeepcool Gammaxx 400 V2 max load temperature (With PBO on) : 60 to 62 degree CelsiusThis is a huge improvement over the stock cooler because the CPU often throttled with the stock cooler. Not only does the Gammaxx lower the CPU temps, it even let me turn on the Precision Boost Overdrive without hitting the temperature limits. To me, the stock cooler wasn’t as noisy as others would say. But this thing is silent. I’m not a big fan of too much of RGB and I prefer a simple lighting setup so this blue led goes well with my rig.For Rs. 1330, I think this is the best cooler in its class. Hope this helped. Thank you.
SreeH –
If your AIO fails there is no fail-safe that would protect your CPU but aircoolers offer a certain degree of passive heat transfer which would ensure long-term durability of your CPU. Many people assume that their CPUs have sensors that would shutdown their computers when there is a temperature spike, unfortunately that didn’t happen with my friends AIO installed. That’s why I recommend this cooler which offers better thermal transfer during high workloads.
Bharat Meena –
The Best air cooler available to buy. CPU never goes above 60 after installing this to my machine.
ABHIJIT ROY –
The media could not be loaded.
Easy to install
Manas Mahajan –
The installation might be a bit problematic if you’re doing it for the first time, but it works great afterwards.No need to buy thermal paste as this product comes with pre-applied paste. very convenient.
sant pal singh –
This cooler is not easy to install but the cooling is definitely 10 degrees lesser than the and stock wraith cooler as this has copper base so cooling is very good.It’s performance can be compared to 360 mm aio.
Akib H. –
Go for it without any hesitation!I have i5 10400,(4.3Ghz,6 core,12 thread).Intel creepy stock cooler -,Idle-43Degc,100% Load 73degc,Cooler master hyper -Idle 35degc, 100%Load 64deg cDeep cool gamaxx 400 pro-Idle 28-30 degc 100% Load -never croses 53 deg c, Typical gaming load 51 deg c…DEEP COOL HAS DONE THE JOB….IN THIS COVID 19 PANDEMIC BRUTAL YEAR,I AM LOVING IT.
One person found this helpful
Lakshmi Textiles –
The CPU cooler us perfect and I had a cut down of 10°C in ghr temperatures…. But we have to careful during the installation bcz the steps shown is not easy for a first time installer…. U have to unscrew the fan and remove from heat sink then mount the heat sink lock the pins…. Then screw the fan back then you are good to go.
DEAN –
It does what it says . If you’re using i3/i5 then. This is one of the best coolers for you
Pratik –
The cooler was intended for my AMD ryzen 5700x on Gigabyte B550 AORUS elite that doesn’t come with any stock cooler. There was no clear instructions for new generation ryzen board, so after sometime I found that the stock socket plate need to be used with four plustic screw mounts and big screws from the box. After that there was no problem. AMD users, please remember that you have to use the mother board’s stock base plate. The temperature is between 35-40 C under normal run. The fan is overall silent. The supplied thermal paste was very useful for the cases like mine that doesn’t come with stock cooler. Overall a good cooler under 2K.
2 people found this helpful
sunil yadav –
Great product from deepcool.just go for it.from intel stock cooler my i5 3570 goes to 70 degree Celsius under Full load and now after installation of this cooler my CPU goes only 45 degree Celsius on 100 percent load.wow amazing thanks
Niraj chauhan –
Bet cpu cooler available in the market at this price. I would surely recommend it
Monil Sunil Dave –
Okay so this is gonna be a long review, so bear with me.I was confused between the Hyper 212 and the Gammax 400 V2. The Hyper 212 was available @ Rs. 2875 which is a lot. I then decided to settle for this cooler for Rs. 1448. Believe me, this was probably the best decision that I made.I have a Ryzen 3600. The idle temps were around 47 to 55. While trying cinebench R23, the temps were reaching around 90c. While overclocking the CPU to 4.2ghz it used to touch 95c.I installed this and the temps dropped more than my grades. At 4.2ghz now my temps never cross 75c and my idle temps do not cross 42c. I used the Thermal Grizzly Kryonaut paste with this, so your temps may vary. The case I am using is the Antec NX 310 with 5 intakes and 1 exhaust at the back.Lastly the only con I found was the removal of fan from the heat sink. It was a tedious job. But nevertheless it came out. The blue LED is okay for me.Final verdict: Go for it. It wont disappoint you!
Sahil –
Good product👍
Dilip Pillai –
For Ryzen 3600. Very good thermals. Running 4.2 stable with 48c.
AKASH –
I have tested Antec A40 Pro, Cooler master H410R RGB on my core i5 9400F processorAfter 30 minutes of the stress test on the Stock cooler – 85′ to 86′ CAfter 30 minutes of the stress test on the CM H10R RGB – 76′ to 77′ CAfter 30 minutes of the stress test on the Antec A40 Pro – around 70′ CAfter 30 minutes of the stress test on DP Gammax 400 Pro – 62′ to 63′ C around 22 to 23’C less than the stockcooleralso, check ideal temps on unit 32 to 33 ‘C on deep cool while 40’C ideal on intel stock cooler intel coolers are total crap…The packaging of this cooler is very simple and they don’t use the brand/company seal on this product it comes as open box unit, deep cool don’t want to waste money on nice packaging and all, but who cares, the cooling of this item is very good then cooler master itselfAND VERY GOOD MOUNTING MECHANISM BY DEEP COOLER BETTER THEN COOLER MASTER AND ANTEC
67 people found this helpful
Krishnendu D. –
Fabulous
Ved Raut –
3 months of use now no noise from the fan is pretty silent.. the size is a bit large so check your cabin before ordering i had to remove one of my cabin fans to adjust it. Temperature remains around 30 degree Celsius when idle and around 60 65 when on max. It comes with a pre installed thermal paste on the heatsink. Any one can installed it if you have atleast install any type of heatsink once. Heat sink quality is tin type not has solid has the stock heatsink but no bad has it is going to sit inside the PC. Cleaning the tin heatsink could be a delicate hand issue there.
2 people found this helpful
Kuldeep brar –
Okay
Ankush Sanodiya –
Working cool
Ali Merchant –
It’s ok did not make a huge difference better buy some other model or brand
Keyur chandresha –
Really the best performing product. Very lower voice, best quality material and superb LED fan.Maintain very lower temperature to 36 degrees at normal work and max observed during gaming 60 degrees.
Gautam Prakash –
Got it for 1389 and in this range this cooler is excellent purchase than the stock cooler. Using it for AMD Ryzen 5 3600 and temps dropped 15-20 Degrees in comparison to stock cooler and under 100% stress test temps don’t cross 65 degrees.
Abhiram.S.O –
OVERALL SATISFIED WITH THE PRODUCT AND PACKINGWHEN I USED MY STOCK INTEL COOLER FOR MY 10400 TEMPRATURE WAS AROUNG 60-70 THEN I UPGRADED TO THIS COOLER TEMPRATURE WAS 30-40
Abishek Nimalan –
Needs bigger case, a bit tough to install on your own.
Posh M. –
Worth buying as it can be compared to liquid cooling in terms of performance. i am very happy with the product.
Damanjit Singh –
Good
Shrikant Bhikaji Sonar. –
Best CPU AIR COOLER MUST BUY KEEPS MY RYZEN 3 3200G On 29°C
Debobrata Chatterjee –
The media could not be loaded.
Good product I like this but price was high this time
manu v. –
Good but Needs minimum 16cm space from mobo surface
Reviewer –
Got only 2 brackets only for Intel lga motherboards not for am4. For am4 they give orange plastic screws. No Am4 brackets recieved
2 people found this helpful
Reynold –
Descent cooler but have clearance issues please check your cabinate and ram profile before buying this
MALODINHO –
Good
vrock94 –
Decent fan , gave me instant 20° drop in cpu temp. A bit hectic to fit on am3+ socket motherboards.
Sakib M. –
The media could not be loaded.
If you are having trouble finding LGA 1700 mounting kit for intel 12th gen, let me know here gsxwonder[at]gmail.I am using it with i7 12700 (non K). Dont use it with anything above that. My CPU reached 91 degree under full load.for Ryzen 5, Ryzen 7 and i5, This cooler will be enough.
One person found this helpful
Praney Kumar –
I have a R5 3600 it it used to run around 80′-85′ Celsius on the stock when at load.With this I now hover around 55′-60′ Celsius at load!Nothing else changed in the cabinet.
Moksh –
One person found this helpful
Suvojit H. –
Great product, my i5 12400f was reaching 100C and throttling with the stock cooler on Cinebench r23 at 100% usage, with this cooler the temperature doesn’t go beyond 64C at 36C room temperature.
Jigar S Panchal –
Stock air cooler used to be 60 degrees idle , gaming exeeding 65+ ,my cpu i7 3770, which has capability to meet temp of 105 degrees.. after this deepcool v2 installation I was amazed, by the way even ur cabinet should be with on perfect air flow. I have zeb Cronus and has 3 fans in front and 1 big in rear, I have gtx 1050ti, so added a fan below the cabinet. There is more ventilation for perfect air flow..so it worked… Thanks deep cool
Anas f. –
Hi
Ryan Paul kharmutee –
The cooler was huge though not gonna lie but it somehow got inside my cabinet. I’ve played games and it does not have any noise. It’s totally silent and it keeps cpu cool too. Check on it’s reviews on youtube if you don’t believe me.
Rajarshi Bhattacharjee –
I am happy with this product.
Dhruv Tej –
This is the budget product which every PC gamer should have. In this budget, getting this many features is a heck of a deal!
Rishee kushwah –
KulDeep RatHore –
Good product in price range
Max Langel –
I disliked that the rfg doesnt work from the start and i cannot get a return or claim my warranty. I dont even asked for a return , the automated keep asking pre programmed questions which are not relevant with my problems.I jst need my warranty, repair or exchange with a new one.
Grandhi Sri Roopesh –
the CPU cooler is very easy to install, its been 2 months since i purchased this, the max temp are down to 70 on my Ryzen 5 3500x. it just takes 10 min to install if you follow the manual. the thermal paste is also very good.
Shankar –
Not match
Rao –
noise level lower than stock cooler
Surajit Hanra –
I bought this for my old FX 4300 black processor and it works beautifully, I see about 5 to 7 degrees lower temperature then the one that came standard with. Installation is a bit of an issue as the clamps do not have the push down lever of the original one, you will have to lock on one side and then balance the cooler on the CPU and push down hard form the other end while lining it up. if you have a bad motherboard there may be a chance you may break it but once done its all good. it comes with its own thermal paste which is a positive. it has no RGB fan which is not really a concern for me.
Pradeep Mehta –
just got delivered the product today, here is my stands.easy to installnoise is same as my stock coolerhelps me to reduce CPU temp. by 15 to 25 %cons:still not suggesting for hardcore gamers, please buy another solid coolersmy pc specs:ryzen 5 3600msi b450 pro vdh32GB 3200hz ram1660ti GPU
AmitK –
well this product is better any stock cooler. it will not let temp go like crazy but not suitable for OC.there’s a nob in bracket to adjust it to lga 1156 to 775. Remove mortherboard from cabinet to put this cooler.
Debasish Chakraborty –
Excellent budget CPU heatsink. Size is enough large. One negative side of this heatsink is… It’s occupied one RAM slot if you are using Gskill or Corsair Dominator/Vengeance. Otherwise it is awesome. Go for it.
Hrishikesh –
Packaging was on pointProducts works as advertisedInstallation bracket is so hard to install i thougt i am going to break my cpuCarefull installation is required
Cooper –
Good work
Akash –
My processor fan was slowing down, so I bought this gamma archer. It was not easy to install, you have to get the motherboard out,After that also it’s not that easy, I removed the fan from sink then install the sink first then screw the fan on it. Very low noise level. This has 3 pin connector so only one speed. This fan is also very big in diameter so you have to adjust the motherboard according to it. Now the processor temperature are in control. This is good option for i3 and less than that. I got it for 543.
Kavin –
Does not work for Amd Asus boards. The seller should have informed in the products page. No return option.
One person found this helpful
sagun raul –
The media could not be loaded.
It’s good for specially amd Cpu (ryzen 5 3600) it drops almost 20 c as compared to stock cooler while gaming and idle position it give 40 c. So go for it. Good product
Allan Lobo –
I bought this as an aftermarket cooler for my Ryzen 5 3600. It does the job pretty well. I am more of a casual gamer and play Dota 2, this cooler is more than enough for that much stress. Only drawback is the led is just one color. I bought another 120mm ARGB fan and swapped it with the original you can choose from many different brands but go with the deepcool argb for best fit and ease of installation.
Samim A. –
I tested this cooler and this cooler performance it too good while gaming its only reach -42° and while rendering temp goes around -50-58° its way than better stock cooler because while rendering on stock cooler my cpu temp goes around 88° like cpu will toast after sometime
shahnawaz Aamir –
There are a lot of flaws with the product.Packaging- It was not properly packed, cheap packaging, it was with torn and broken box.Accesories- Intel Processor kit, accesories are broken, luckily I am using in a AMD.AMD- Clamp is hard to install, clamp seems to be short.Size- Does’nt cover the entire processor. I dont know how much cooling it will provideClip- The main clamp/clip has 3 pins, whereas my earlier fan had 4 pins. Also, the motherboard has 4 pin slot.I am using it, as the product came after almost 7 days and I was in a hurry as my previous fan broke down. But, if you are buying this item then buy it in your own risk.As per knowledge, this fan’s price should have been around 300-400 bucks, I bought it in 606Rs.Good part is you can use in both Intel & AMD motherboard and comes with thermal compund.
True Gamer –
I am using it in ryzen 7 2700 .So it is ok in at 3.6ghz oc it’s temperature go almost 67° at full CPU load and 77° at 4ghz and my MB is not that good so I cannot overclock it above 4ghz so I can’t tell but I think at 4.4ghz it will go above 80°.But if you have a cpu like ryzen 3 or 5 you can easily overclock it till 4.4 ghz with temperature like 65°.coz I tested it with ryzen 5 3500 and got 62° on 4ghz and 65° on 4.375ghz.So,it’s good but it is not good for ryzen 7 cpus.
Kong Khawlhring –
After 1 year its still like new. Quiet and functional. I am using on Gigabyte B450 ds3h board.
Rahul –
Best cpu cooler for budget pc builders…first of all my spec areZeb g41 d3 mono4 +4 =8 gb ddr3 ramIntel q9650 processor120 gb ssd500 gb hadNvdia 1050ti graphics cardThis cpu cooler easily controls the heat of q9650 processor a beastly processor indeed of its Era…I have run pubg gtav and room temp remains under 55 to 60 at max speed utilizing all the cores ..normal remains under 39..can go for it..
Sagar –
Working perfectly.. it’s bit bigger then all other coolers.. and installation is kind of tricky becouse it’s have so many different attechment
Prabal kisku –
Nice
Hotwheels –
at first had received the set minus the 1700 socket bracket, returned it and received a new piece with the missing bracket. the cooler is a piece of art itself, using it with only one fan, at the center, the chunky industrial looks is awesome
Placeholder –
I have intel 3570k which is meant to be the hottestIt reduced my cpu from idle 85 degree to idle 49 degree
Jagminder Singh –
Yess best cooler in the budget
rajesh patel –
Nice
Loki –
Enough for those who do not look for overclocking
Rahul Ranjan –
The media could not be loaded.
Watch the video what is this u all too are having the same issue with this cooler?
One person found this helpful
Ry –
The media could not be loaded.
Build quality looks cheap but nothing that will fall apart. They changed the am4 mounting type so YouTube guides won’t work. Use the instructions provided instead .New AM4 mounting is cheap but easier . Has to be done with existing back plate that comes with motherboard. Cost cutting?About delivery, the box wasn’t sealed so removed a star. And removed another for cheaping out on am4 holders . New ones are made of plastic.About cooling , it’s really good for my 5600x. almost 15 deg difference under load.
2 people found this helpful
Mohammad Suheb –
~Full Review~* Packaging- The packaging is very simple but it will not damage your cooler either your fan or accessories* First Impression- First, you see a giant heatsink and a prefix fan and a packet in which some important accessories (Thermal paste, screws, and brackets) , There is a branding of DeepCool to the top of the heatsink which looks very cool, the heatsink is heavy (600g), the blue led fan looks so good, although we don’t get an RGB fan in this price*Pros – 1)- Believe me it really reduce the heat from the CPU almost 15*c (compared by AMD Wraith Cooler) 2)- Blue LED fan looks so cool in the case, Fan doesn’t make sound or vibration even on max load (1600RPM) 3)- Thermal Paste quality is nice 4)- Installation seems difficult but it’s really not, You can install it without removing your motherboard from the case 5)- Applicable to almost all type of motherboard (AMD or Intel)’s 6)- The size of the cooler is decent for Mid Tower Cases*Cons – 1)- There is no RGB fan 2)- You can use given Thurmal paste for only one time 3)- Installation takes time 4)- There are no extra fan clips*Conclusion – * This is really best CPU cooler under 1500~2000 INR if the prices are high then you should wait for it, i purchased it in 1399 INR.*My Experience – I was using AMD Wraith Cooler and that was overheating to 83 to 87*c on load then I purchased Ant esport ice C612 cooler which didn’t help me, so I returned that product and after waiting for a few days Finally, I got a deal of 1399 INR for this product so I purchased it and now my CPU temperature is 68~70*c on max load.
14 people found this helpful
swarnabha –
I bought it for my core 2 quad q8400 on lga 775 but i had some research on it but i found some wrong information on lga775 support . I recommend you to do some research on it then buy it but it fits on AM4 socket so if you have ryzen processor then blindly trust this.
Kunal Kaity –
Very nice Aftermarket Cooler, Temperatures are very Good my i3 8100 is give 83° c temp. On full load, Now its 56°c 😊😊😊😊
hkr –
Most likely old stock. I wasn’t given an LGA1700 mount.
Sudheer V. –
very nice item.. quality and price 1400+ rs also very good
Georgekutty tu –
Good product for intel Pentium and dual core
Sharath S –
I got this cooler since my chip was running too hot on stock cooler. This tower cooler is s little tricky to install but performs like a beast. My temps doesn’t go over 70 even with heavy load. Good value for money, highly recommended.
Prodip Paul –
Bw
Zubair –
Not the easiest to install but definitely worth buying.
shaikh f. –
Super cooling. Great quality at this price.
Aayush Nagpure –
I am not a fan of air coolers honestly. However, i always prefer the AIO over air coolers. Since, i installed this cooler in my pc it worked far more better than my intel stock cooler. After a decent gaming for 2 hours my intel cooler was quite a noisy and not effective as had lot of temp rise. I was not satisfied with stock cooling at all. Then I tried to solve my pc problem by using this air cooler. Its silent, have a led built inside and its fan is very big as compared to stock cooler. Its not only silent it cools my pc efficiently. Since using this i didn’t see any excessive temperature rise in my pc. It does it perfectly keeping CPU temp. to between about 40 to 50 degrees. And you should know i use pc for gaming as well as in graphic softwares like (CAD, CATIA,ANYSIS) etc.My personnel suggestions is to have a try this.Thank You
Mursaleen Shaikh –
Received package in a day.Heatsink was damaged luckily not too much.Adviceable to have the amd bracket which comes with the Mobo, as it is compulsory without it i don’t know how to install.Installation took more than 2 hours.Regarding cooler it is best under this rangeCPU(5600G) temp went from 77C to 68C on full load, good upgrade over stock cooler.
Posh M. –
Worth buying as it can be compared to liquid cooling in terms of performance. i am very happy with the product.
sagun raul –
The media could not be loaded.
It’s good for specially amd Cpu (ryzen 5 3600) it drops almost 20 c as compared to stock cooler while gaming and idle position it give 40 c. So go for it. Good product
Jeet Rajput –
Good item but be carefull its not compatible with Lga 775 socket,
Shiju Poroth –
Good built quality, easy to install, and really worth for what we pay.
Nitin Choudhary –
Reduce temp by 15-20c. Better than cooler master 212.
Charat singh –
Best at the price and best cooling minmum temperature = 36 degree Celsius, maximum 85 degree celcius
Aditya raj –
Wow unbelievable. It works very nice…i cannot pay valorant in good FPS but after installing this..i am getting good fps… before 54 fps now i am getting 140+…its in game… Love this…it comes with Thermal paste 💓💓
Avadhoot Desai –
The media could not be loaded.
A great product. But its Just hassle to install in mini itx. It took me 2 hours to intall it on my h310m 2.0. I recommend upgrading your MB first. My ram stick barely touches it(its a naked one) forget having it installed on a covered ram stick.
Sukant Chhetri –
I Am pretty happy, now my cpu temp is not going above 50 – 60 degree. Earlier it was reaching more than 85 during the test.
paramjot singh. Honey –
it will not fit in normal case’s
One person found this helpful
Sudhanshu –
Very good for cooling
singh –
Good on this price 1320
SUMAN PRAMANIK –
The media could not be loaded.
Yes
Dwarka Chary –
The product packaging is horrendous but the performance is pretty damn good. With a 3 case fan setup and using this as a pull setup , the load cpu temps dropped to 45C vs 77C in gaming. That coupled with low noise is perfect.
sanchit verma –
Fan is good. Noise levels are very good. Installation is a little bit tedious. The steel frame for fixing the fan gets stuck in the fins of the fan and thus makes it difficult to install. I had to take out the fan from the assemble and then I installed it in the socket. Then i again fixed the fan.After all that temperatures are in range of 40-78.
Moushumi C. –
I just can’t express my joy after getting it , It is the easiest fan I have ever installed…Noise level is so low…Even my breathing noise is just lower than it to be precise…most value for money fan available today on 23rd May , 2021 …Just don’t go towards liquid coolers …Those liquid coolers are not worth it…This air cooler is better than most liquid coolers…My I5 11600k which was reaching 95°C (and sometimes even 100°C ) under only 20 percent load with a regular cooler Is now reaching 59°C during stress test at a full 100 percent load during stress test…I would just recommend you to buy this…It is probably the best cooler under 5,500 (though I got it for only 4300) ….No other cooler at this price point even comes near to it in cooling performance…Best bang for buck…
2 people found this helpful
Yedu Krishnan –
Brought for by Ryzen 5 3600 for CPU mining,In the stock cooler when start monero mining temp suddenly goes above 95°C and am unable to mine.Then i searched for Budget 120mm cpu cooler and got this product.After one week of working my cpu 33°c at idle and 76-79°C under full load 4000mhz clock on monero mining,when Gaming temp become under 70°c
Arpan –
Temps before (with an An*** C40) – 78 degs under load with an AMD FX-6300@4.0GHz, which led to CPU throttling.Temps after installing this Gammaxx 400 PRO – 62 degs max under full load and at 4.5GHz, a very stable OC.Pros :As the headline says, its as good as an entry-level Liquid Cooler; great f you’re using a smallish case or cant fit in a radiator. Those Dual Push-Pull fans and massive heat fins do a spectacular job!Cons: Heavy and large; Installing those spring-loaded screws is likely to take some extra effort – make sure the motherboard is well supported.The Fan at the front is likely to be pretty close to the last RAM slot of you’re using all the 4 slots.Fixed Blue lighting – only a concern if you’re looking for Cyberpunk-like RBG lighting effects. I love the Blue!Conclusion – Well worth the installation effort for the 20 degs of extra cooling headroom plus not so loud too!
One person found this helpful
Akshay Kumar –
Installed it yesterday , this cooler works well for my ryzen 5600x as the temperatures were going close to 93-95degree celcius while gaming after installing the cooler the temp dropped by 23-25 degrees which is huge!!!! Now at full load my processor touches 72 degrees at peak !! At this price point i recommend this product.Pro Tip: Make sure the screws are fully tighthened in order for the cooler base to make full contact with the cpu i had not tightned 1 screw because of that the temperatures were not dropping i removed the cooler and re-installed it it was working fine!
Hari K. –
Well enginered for cooling best purchase ever temps not exeding over 65 under load
saikat –
stock cooler -> 87-90 degrees (while using 2 emulators at the same time )gammaxx -> 42-45 degrees (while using 2 emulators at the same time )totally in budgeti have to say stock coolers are crapi had purchased new thermal paste and applied but only 5 degrees dropped
Keshab –
ITS WORKING FROM 95° TO 85° REDUCED TEMP…. WITH RYZEN 3600 AND GTX 1050TI FULL LOAD….. 10 TO 12 ° REDUCED IN FULL LOAD…. AND IN NORMAL WORK ITS 60° AVG… I AM NORMALLY HAPPY WITH IT…. I THINK I DID NOT DONE A BAD CHOICE HERE IN COMPARE TO OTHER SAME CATEGORY PRODUCT….ITS BETTER …FOR ME…
3 people found this helpful
sujay kuma dutta –
best cheap easy to installbut try not to install
AJAY SINGH –
Buy only if you have i3, i5 or R3, R5….
Sashibhusan sahoo –
If you are a decent pc user, using your PC in stock setting then it is highly recommend. I prefer it to use over upto 80 watt CPU. It is very easy to install. So go for it.
Mohd Rushan –
The media could not be loaded.
sayyed yasir 91 –
Decrease 20 Degree on full load, from 86 – 88 to 67 -68
Prashob K –
Awesome
Special Fx –
The product is very good and highly satisfied with it. I basically used it for cooling a Peltier heat sink.
Venkat –
Excellent Budget gaming processor…value for money… I can play all games with ultra or very high settings at 60+ fps with my i5 12400f processor that is paired with RTX 2060 and 3600 DDR4 ram..Pros:High performance that can be even paired with RTX 3080 / RTX 3090 cardsValue for money and budget friendlyCons:Stock cooler is very bad. Better purchase after market cooler like cooler master or deepcool etcOver all its best new gen intel budget gaming processor
Vishal M –
I have a ryzen 3600, with B450m pro4 motherboard. I did the installation without taking out the motherboard. It was difficult to process and took me almost 2 hours to complete the process.Suggestions: remove the fan from the heatsink and do not attach it till the process is done, otherwise you will have to remove it. The fins are very delicate small pressure will bend them. The width of the heatsink is not much therefore, no issue with the ram. It is better to always install ram in slots 2 and 4 if you have 2 sticks.Results: Temperature drop of almost 10 degrees. Not much for this amount. Earlier I could not complete the Cinabench R23 without hitting 95 on the CPU at this point I would stop the test to prevent it from throttling.If you have a Mid-tower or full tower no need to remove the motherboard. I had mATX and mid-tower and I did not remove it from the case. The temps are not that low compared to the stock cooler. The Cinabench run made it reach 88 degrees maximum. I am happy with this result. For me, the ambient was almost 42 degrees and the idle temp was 47-49 degrees.
One person found this helpful
Hrishikesh Govindan –
Needs stock backplate to work! If you don’t have it don’t order it! From what I know, pre-2020 this wasn’t a problem. But Deepcool started cheapening out and removed the backplate supplied with it. This is the root cause of the problem. Stay away if you don’t have stock backplate.
One person found this helpful
Manthan Soni –
Very good cooling before this cooler 56 C at ideal 78 C at load .After this cooler 42 C at ideal 65 C at full load best air cooler ever at this price tag.
Soham Chakraborty –
Was not expecting this good it wil be. Noise is very low, looks nice with blue light. And yes where comes performance, it easily beats its competitors in this price range. My previous idle temp was about 47° C and while doing stress test, it was easily reaching 90°C when using the intel stock cooler. Now the idle is about 37 and max is hardly reaching 62. Very much satisfied with the product. Go for it. Btw it needs little bit of patience to install.
dHarma –
Not good as thinking. Using with ryzen 7 3700x . 7 degree temperature decrease. For 7ć 4500rs. Is too much. Buy dark rock pro or dh-15
Jyotirmoy Sen –
Unless put on full speed you won’t hear it much. Serves the purpose very well, even better than some cheap liquid cooling solutions, though looks are a bit cheap. Price is very justified if purchased below 1300.
J.Rithesh –
Max temp doesn’t cross 64 degrees even at peak load. It fits comfortably is the chassy without obstructing the RAM slot and best of all it’s completely silent.- I’m running Ryzen 5 3600 at base clock of 3.6GhzNote: Pay attention to the fan’s airflow. The fan pumps air into the heat sink unlike stock coolers. The cool air enters through the fan and hot air escapes from the other side without the fan to be exhausted from the rear of the chassy. The fan should be facing towards the Ram slots for efficient cooling.Here is my story as to why I bought this. I had just assembled a new PC and when I ran cinebench to check the thermals, I noticed that it crossed 90’C frequently . I freaked out and ordered this cooler immediately. When I ran the test again, the temp crossed 90’C just like before but this time my performance score was much higher. After some research I found out that the high temp was due to ‘AMD precision boost’ – that was enabled by default. I switched back to base clock and ran the same Cinebench test again. To my surprise the max tem never exceed 64’C.I bought this over a misunderstanding but I don’t regret it, considering the boost in performance and extended lifespan of my CPU , it was well worth the money!
Bikash Dhar –
The attachments clips does not let the cooler stay put on the mother moard on my Lenovo Thincenter Pre built PC, so had to do some MOD with Zip ties.
Vishnu Ashok –
OMG its worth for money…Processor Intel core i5 8400…Intel Stock Cooler idle 36 degree,gaming 70-75 degree…Deepcool Gammaxx 400 V2 idle 32-33 degree,gaming 47-52 degree,adobe premiere pro 12min rendering 45-47 degree….Never expected this kind of performance and its very easy to install…
One person found this helpful
Aradhya paul –
nice
Kirito8x –
I was using stock cooler for my i5 9400F and I was hitting 100C while playing dota and other games for some reason, This cooler does good job as I was only getting 50-70 while playing the only downside is that it actually screams at high speed lol other than that really good product for the price, Happy customer 😀 oh one more thing It was also very easy to install but it took me an hour install because I was doing it the wrong way LOL
One person found this helpful
RickyN –
As expected. Thanx.
Pb –
When I decided to buy an after market CPU cooler I had 2 choices either buy DeepCool GAMMAXX 400 V2 or Cooler Master Hyper 212. I chose Deep Cool cause it was almost half in price. But now it has been more than 2 weeks using it and I am quite satisfied with this CPU cooler. It’s light weight, quite and keeps my CPU Temp under control in heavy workload. The best thing is, its heat dispersion surface is much smoother than Hyper 212, which is very important because it affects the cooling.If youbare looking for a budget CPU cooler, just go for it. You will face a bit difficulty in installation but it’s with all tower coolers.
ranjan soni –
So…The Cooler fits in mostly all the mid tower cabinets(i have corsair spec 01)…its a little bit complicated to install since i had to take out motherboard for installation…And yes the cooling….iam using R7 1700 which was getting heated at 3.7ghz and was touching 100C° at 100% load.After installing the cooler…i was able to increase the clock speed to 3.9ghz which barely touched 90C° at 100% load.good performanceI ruined my Red and black theme 😂 but yes what else u expect in 1400.Recommended for people who want to do a little bit over locking
6 people found this helpful
vivek salokhe –
Fins where little bend , but not an issueI made them right , best Air Cooler forRs1400 , temp. Achieved were great 63°c max. Temp. For Ryzen 3600.😇😇😇😇😇😇😇😇😇😇🤩🤩🤩🤩🤩🤩🤩🤩
One person found this helpful
Gurpal johal –
Easy fit in my Corsair spec 01
Rahul Ratnakumar –
Great cooler temp max before use is above 60°C, now its 45°C, Highly recommended.
Rohan* –
I have brought this cooler for my PC upgrade but which will be i9 11900k but as all parts didnt arrive yet so using and testing this cooler on my older i3 6100 processor . I tried cinebench to check and found perfomance increase in single core from 306 to 930 points and for multi core it increased from 2285 to 2398. Previously with stock cooler temperature were in between 60 to 65 but after installation of the cooler they went down in the range of 45 to 50. Installation is easy and looks are also very great. Selected this cooler against Noctua D15 as because of its big size. Anyways, it works efficiently and very silent and serves the purpse. Willl upgrade review once tested on i9 processor.
Rohan Raj –
Good coolingI use i5 processor 10th gen for editingI feel performance batter After installing deepcoolNo heating CPU long time
Shirsendu Gain –
Not buy for high lvl processor
ROHIT sarkar –
50 to 70 °c
Debasis Dhar –
Dont waste money on some water cooler for not so power hungry cpu. This Deepcool air cooler perform its job well. Benchmarking 12100f at ambient ~36 c raised idle temp 38 C (earlier 45 C) to max 63 C (Earlier 80 C+ without air cooler). New look 12th gen Stock Cooler Sucks both in temp control and noise level. Yes, VRM mosfet too needs to be cooled. Added extra good 140 mm exhaust Fan which reduced temp to 60 C (earlier 70 C) at max usage. Lastly, GPU temp can be easily reduced readjusting GPU fan speed .. MSI AfterBurner.
xumar –
good product. Nice cooling
Paras Nagar –
I was Looking for a good cpu cooler not very costly.Then i found this Deep Cool Gamma Archer.Trust me this fan so huge it cover up most of the space in your cabinet.Installation – It can take a long time to install this.In The Box – Cooler itself,One small packet of thermal paste also known as heatsink compund or thermal grease,and the push pin screws,and the socket bracketTemp reading Before – Ideal – 58 Load – 76Temp reading After Installing this fan – Ideal – 43 Load – 61
5 people found this helpful
Anonymous1994 –
Best ARGB + PWM budget fan with low profile. Couldn’t ask for more. Excellent product.
R Christen Raj –
Excellent product.
Vishal M –
I have a ryzen 3600, with B450m pro4 motherboard. I did the installation without taking out the motherboard. It was difficult to process and took me almost 2 hours to complete the process.Suggestions: remove the fan from the heatsink and do not attach it till the process is done, otherwise you will have to remove it. The fins are very delicate small pressure will bend them. The width of the heatsink is not much therefore, no issue with the ram. It is better to always install ram in slots 2 and 4 if you have 2 sticks.Results: Temperature drop of almost 10 degrees. Not much for this amount. Earlier I could not complete the Cinabench R23 without hitting 95 on the CPU at this point I would stop the test to prevent it from throttling.If you have a Mid-tower or full tower no need to remove the motherboard. I had mATX and mid-tower and I did not remove it from the case. The temps are not that low compared to the stock cooler. The Cinabench run made it reach 88 degrees maximum. I am happy with this result. For me, the ambient was almost 42 degrees and the idle temp was 47-49 degrees.
One person found this helpful
Dhanaraj Rk –
I have been using Deepcool Gammaxx 400 v2 since the starting of last year’s DEC. And its been doing well keeping my CPU idle at 23-25 °C which goes upto 45°C at heavy gaming which is extremely good as an Air cooler.
JAMES JOHNSON –
Before using this deepcool my temps under load was 70degree and after using it got reduced to 51degree and under idle conditions it’s 36degree after using this cooler
Linga –
Slient, Powerfull and Fast
prabhakaran k. –
It’s doing its duty nicely! Good product.
Aditya –
Good for amd i have a amd ryzen 5 3600 and i dont have a ac in room…i live in mumbai so its pretty hot here still cpu temps are below 65c for me under full gaming load rarely it touches 70
Rohit kushwaha –
Good quality….
AJESH KRISHNAN –
I HAD AN AM3+ SOCKET AND ITS INSTALLMENT WAS SO HARD.I HAD TO APPLY A LARGE FORCE TO INSTALL IT ON THE MOTHERBOARD.IT PROVIDES PLASTIC SCREWS TO INSTALL ON OTHER TYPES OF MOTHERBOARDS WHICH I THINK IS NOT A GOOD IDEA.BUT COOLER WORKS FINE.NOTE:IT IS 3 PIN COOLER..IE,IT’S SPEED CANNOT BE CONTROLLED
2 people found this helpful
Sreekumar –
Silent, cooled my cpu 25% more than the stock intel cooler did.
Prasad Maitra –
What’s interesting about this CPU air cooler is the price and the value it provides. I was skeptical about this cooler at first due to its cheap price.Thanks a guy on YouTube have helped me know about the efficiency of this cooler and offer a step-by-step guide on installing this cooler has made me buy this cooler for my Ryzen 2600x.Since I built my PC I was relying on the stock cooler but temp soon getting high when playing games or remain above 50^ in idle mode.The worst thing is with AMD is the temp spikes which is a major concern for most budget PC builds. The temp after using this CPU cooler has massive dropped. With 6 case fan installed I can’t find the reason for overheating. Since I found a video explaining the installation process I took no time to buy it.The installation is pretty straight with provided paste (good quality) the CPU cooler did a decent job lowering my temp of 25^ approx. The CPU fan has a blue LED and goes straight into the CPU 4-Pin connector But sadly which the Fan lighting cannot be turned off.Anyways it looks decent and better than most CPU coolers. Although I expect the CPU fan to be RGB at least in dirt-cheap price. But the most highlighting factors of this CPU cooler is the extra fins (greater surface area) offering awesome heat dissipation right from the moment when CPU kicks in.I never tried a CPU cooler before but after using it more than 2 days I am very satisfied with the ability to manage thermals on my PC. I have attached a few screenshots for reference.>>Highlights<<>>Tower size CPU cooler with 157mm of height>>Extra fins offer a better surface area for better heat dissipation>>CPU fan remains silent even in full speed.>>Easy installation and can be installed without taking out the Mobo from the case>>Good quality thermal paste provided>>Temps on 100 loads didn’t go over 71^>>Best CPU air cooler for AMD Ryzen CPU’s
3 people found this helpful
pranjal51193 –
i am using it with r5 3600.Different between stock cooler and this is about 25 to 30 degrees however when boosting upto 4.1ghz, the gives an audible whining sound even in the case.You have to adjust some curves so that it doesnt ramp up.
Ajinkya kore –
On stock intel cooler it was hitting 70 to 74 degree temprature. After installing this unit now max temprature it hit recently is 55. So you can go for it.
Girin –
Ok
surajpal mazi –
It wil reduce 10 to 15 degrees of temp.previously my temp goes upto 80 c while gaming Apex legends and now it’s hardly goes above 70 c.Value for money
rajan maheshwari –
good 1
vaseem –
only one word……………………………..awesome
Mandeep S. –
Excellent
Divit –
I did a cine bench r23 on the stock cooler with freshly applied thermal paste I got maximum temp of 95 and a avg of 93Withe the deep cool cooler I got max temp at 76 and avg at 72 it was pretty huge difference and for the price of 1200( when I purchased) it’s a must buy u could do some mild overclocking with ur cpu and get better performance while keeping ur processor cool
Kaviyarasu –
I bought a pc five, six years ago and recently Whenever I play PUBG lite PC I could play only in very low settings and with lots of frame drops. CPU temperature hits 100 and thermal throttles while I play. But my CPU is capable of Handling such tasks. I thought about buying a dedicated graphics but wanted to try replacing the CPU fan first. I was confused which one to buy.This one was cheap and I didn’t know if it could handle this. The other options were twice the rate. So I finally decided to buy this thing after much thought. I placed the order, and it arrived in two days and I fitted it myself.Temperature before installing it was 60 at normal and 100 at gaming and it thermal throttled even on low settingsAfter installing The Temperature is 45 (normal) and 52 (gaming at ultra settings)This product is really worth itand now I could get by without buying a graphics card for at least an year without any performance loss
Sidharth –
Good but not great. This is keeping my 3900xt at like 70 degree
Mustafa Ahmed –
On i5 9400f,Stock Fan normal usage Temp: 45-50 °CGAMMAX normal usage: 35-40 °CStock Fan light gaming: 55-65 °CGAMMAX light gaming: 40-50 °CStock Fan heavy gaming/usage: 75-90 °CGAMMAX heavy gaming/usage: Doesn’t exceed 60 °CI play ArcheAge which is badly optimized and has heavy CPU usage and the temperature used to go above 80 °C on the Stock Intel Fan, but it doesn’t go beyond 60 °C on GAMMAX, pretty good cooling.Installation is easy, should apply back plate and back screws and then screw the motherboard on the case before applying it on the front side, as the fan and heatsink is so big its very hard to screw the top left corner part of the motherboard. Also check your case width is larger than this unit’s height, for my case it fit in perfectly leaving .5 cm gap to the side panel, RGB ram may not fit in with this cooler if the RAM stick is too big.
One person found this helpful
Robin –
The media could not be loaded.
Fan stoped working in 1 month …how is this possible …. I have 2 coolers which are running since my childhood aprox 15 years.. so cheap material used
guptaji –
I have a Lancool 215 Case, which is pretty big, it supports up to EATX motherboards. This cooler is so large, it’s only a few millimetres away from the glass panel in my case. I think it’s the same as the normal GAMMAXX 400 which is ₹1000 cheaper than this, just that this “pro” version has 2 fans on it instead of one. Should have just gotten that and put my own fan.. but oh well.As for cooling performance, I think it’s pretty decent for the price. Have an i5 10600k and my ambient temp is 27C. I’m getting CPU temps of 29-32C and with all cores stressed, I get max of 70C. Which I think is nice considering this cooler is only worth ₹2400. Note that Lancool 215 is a decent airflow case which might also be contributing to my temps, so your mileage may vary.Installing this is a bit of a hassle, mostly because the fan mounting mechanism on this SUCKS. One other minor annoyance is that the fan on this just has a LED which constantly glows with a blue light. I let it stay for a couple days but it just looks bad and distracts me so I cut the LED wire eventually.Overall, a decent and affordable cooler. Go for it if you wanna cheap out on cooler and spend the money on more important components I guess.
One person found this helpful
vinvb –
Idle temperature around 37 celsius.
Nagaraj –
Installation was little hard, works well
SUNIP HALDER –
Best
Priyanshu –
Great cooler it decreases my cpu temperature from 98°c to 71°c on full load.Average of about60°c to 65°c but the problem is it is a little bit hard to install… Satisfied with the product at this price
Prabhu –
my temps almost went down by 20°C
Anmol malik –
Decent cpu cooler 🆒😎
augustin r. –
Go For it you wont regret..My ryzen 5 3600xt oc at 4.5ghz is hovering inside 31°c to 68°c which is heaven…..
One person found this helpful
Sagar D. –
Ease of installation – Did not expect to go the installation this smooth, no hassle, to the point instruction manual, very intuitive for even those who are new to the pc building scene.Noise levels – I was surprised by how little noise it generated while stress testing in cinebench r23, all thanks to the 140mm fan.Ram compatibility – no Issues with ram compatibility as even with the fan installed to the cooler, it leaves enough space for 4 gskill Trident z (ram height 44mm). The fan does not extend to the point where it might hang over the team slots, you can use whatever monstrous Ram your want without sacrificing the cooling performance.Cooling – As mentioned in the title, the cooler brought down 27c off the cpu ( tested cinebench r23 for 30min loop). This cooler could even keep up with the likes of 5600x / 12600k / 5800x / 12700 running at stock (for intel)/ pbo(for amd) limitsBonus – got this in a sale for under 3k, best cooler at this price point hands down.
Sudip kar –
Installing Is a headache
SELVA –
The media could not be loaded.
Tested it and found very fast enough to cool more types of processors LGA 775/1150/1151 ETC and most type of AMD processors . I wonder why to go for copper tube processors. They too are efficient but very costly comparing this . Very cheap . I bought 2 pieces. The fan is of good quality and has a large span compared to 120 mm fans normally used in Processor coolers. *****
Kalpajyoti C. –
Reduces my Ryzen 5 5600x’s temperature by 10-15 degrees in summers…if you don’t care much about rgb ..this is a best buy in budget
karthick –
First shipping product Damaged but done replacement and work good idle Temp on Stock Cooler 54 degree and with Deepcool it is 42 degree
karanpreet singh –
I replaced stock cooler on 5600x with thisStock goving me 95temp in games like warzone and apex legend ,After installing this windmill my temps dont rise beyond 75 , which is unimaginableI thought i should get around 80+ but this is fantasticShould go for this rather cooler master 212
shailesh y. –
this is best price cpu coolerthis cooler gives a 60%- 63% best tempure in 100%in this cooler used best quality heat pipeand he had low noiceand easy installationif any one purchased this cooler then go a headbecause this cooler was not going to disapoint you
One person found this helpful
Alex –
Fan stopped working exactly a month after purchase.No response of deepcool customer support.
subham –
Trust me deepcool assasin 3 is a beast before I was using thermaltake ux100 and the ideal temps were around 45-60 mostly it hovers around 55-65°c and some Times goes to 70°c as well after installing this my ideal temps are 37-40 when you do something it goes to like 47 on soo while playing games 65°c on all ultra settings only this I got into a problem was the case iam unable to close it due to its size be sure to have full tower or it fits in some mid towers aswell I have a mid tower but iam unable to close the cabinet orther than tha🔥🔥🔥🔥 baap of all air coolers with very less sound ♥️♥️
Suman –
OP Product
One person found this helpful
prakhar khatri –
Returned the product, bcoz received damage box, opon from one end, product fin was pressed at the corners, an seems to be dirty like used and not cleaned.
Auqid Irfan –
Works better than the stock cooler, easy to install and manages to keep the temps under control. Noise is not that noticeble. From 90° to 75° on 100 percent cpu usage. Idle temp is 40°. With thermal paste included this is the best deal.
shaik jaseem –
Keeps the cpu cool and is silent ,was little difficult to install but effort was worth . I do cpu heavy tasks like 3d rendering and temps don’t cross 65°c ,go for it
Shaik ibrahim –
Keeps its cool at budget – ideal 34c
Rivamp –
Keeps max temps under 65 for my core i5 7500 playing battlefield 5. Dont bother about idle temps going down , thats not what a cooler is supposed to do. It will idle around 40 or so. Every processor is slightly different there.Machining is precise, fitting is super easy, everything fits perfectly.Glad i saved some money instead of going with another brand.
Chinmoy Das –
I have an i3 4170,had a stock intel cooler installed before,and somehow it was malfunctioning,giving me idle temperatures around 42-50°C and hitting 100°C while working on somethingNow after installing this one,I’m getting idle temps at 32-36°C and around 52-59°C when in 100% CPU usageGreat product
BARUN MAJUMDER –
go for it .follow the instruction for installation .
Mukesh –
Good products par nakli packing product
Raghav Singh –
S Dayal –
I have been running stock cooler for my AMD processor and wanted a budget cooler after the cooler fan failed. This tower cooler looks big, but is quite easy to install. I did not use the thermal past that was ready on the cooler – used ARCTIC-MX4 instead; I am not into gaming, but do quite a bit of video encoding during which the CPU runs at 100% for a few hours. The temperatures have always been under 60C even during hot days. The fan is large and covers the cooler well and runs very silent. Overall a great cooler at this price.
Rahulmks –
i like the product and thank you very much to the delivery boy who deliver the product to my door step
likhith –
Best probuct Satisfied
Anal p. –
Used it on core 2 quad q6600 temps under 100% load were 90cPc started crashing after 7 min of aida64Would not recommend to use included thermal compoundAlso not easy to install because of poor design I was having difficulty installing removing fan and then installing helpsIt’s ok for CPUs like Ryzen 3 or core i3Ryzen has its own stock cooler so use that rather than buying this and it is better than intel stock cooler
Johnson Rajkumar –
I7 7700:with stock cooler idle 60 degree celsiusI cant full load with stock cooler cause it reaches100 degree celsius and temp throttles.But after this cpu cooler in idle around 40 degree celsiusAfter 1 hour of full load it reached the maximum of 77 degree celsiusBest cpu cooler overall fir this price Go for it
someone –
Reduced temps on full load from 85° to 55°. Installation was also pretty easy. Couldnt ask for more at this price.
One person found this helpful
ranadey –
Good product
Divit –
I did a cine bench r23 on the stock cooler with freshly applied thermal paste I got maximum temp of 95 and a avg of 93Withe the deep cool cooler I got max temp at 76 and avg at 72 it was pretty huge difference and for the price of 1200( when I purchased) it’s a must buy u could do some mild overclocking with ur cpu and get better performance while keeping ur processor cool
KulDeep RatHore –
Good product in price range
Alwin Thomas –
its perfect for the cpus under 95W tdp
asish thomas –
I love it. It’s the best thing I could have bought for my PC besides the components. Go for it.
PRITHVIRAJ –
Better than stock cooler.
CHARLie –
Good Cooler Replaces Stock
Sahil Bhandari –
The product is rated for 180 Watts but in my opinion its is only for 95 Watts. The ideal temp I get is around 37 to 40 degree celcius, and at 100% CPU load it maintains 75 degrees to 82 max temperature. Make sure not only CPU cooler is responsible for temperature but also a good thermal paste, combine a good thermal paste rated for above 5W, and I have I5-9600k and works at only turbo frequency I have not overclocked the CPU, but I think this cooler is not good for overclockers. And while I play GTA 5 at Max Settings, the temperature maintains at 60 degree to 65 degree not more than that. Rest my opinion is, if you have a tight budget go for it, it is worth buying rather that using a stock cheap cooler. And really the removal of fan if super difficult.
One person found this helpful
Jasbabu –
This is the best cheap cooling system you can ever find for your CPU. Fitting this over your CPU, is a little bit of pain, but once you are done, it works wonders on your CPU heating. The “SpeedFan” shows my CPU to be always around 40 degrees, while previously with the stock CPU cooler, it was very hot over 70 degrees or even more.It is very silent too and you won’t even notice it running inside compared to the stock cooler.The only con I really find with this is that it is a quite large one, so you will need some space inside to accommodate this. If your chase is mini or micro ATX, you will probably have difficulty installing it, but still with some effort you can.Some days my computer will be running throughout a day or even more and still, the core temperatures in my Core i4 won’t run higher than 40 plus degrees, the most cool part of this cooler!!
Arham Nasir –
not easy to install but worth every zingle penny
Avinash –
Good performance
Rohan –
I can’t tell about this fan’s noise as there are 4 other fans spinning in my cabinet. I think it does a slightly better job than the stock cooler. The instruction manual has shown some components to fit in inside out, so watch out for that.
Vishal Meher –
The media could not be loaded.
Happy with the purchase. Decent aftermarket cpu cooler.
SRINIVAS C. –
Heat shrink base not completely occupied with amd processor base and not perfectly suitable for amd socket. Fan quality is ok, also no returns are accepted by seller, only replacement. It’s not full filled my requirements.
One person found this helpful
Abhishek Kareer –
The product is of good quality than other product at a similar price like Antec A30 and CoolermasterT20 yet its installation is difficult then Coolermaster T20 and AntecA 30 if you want the best product as compared to Coolermaster and Antec and good quality then go for Deepcool where you have to get the help of some professional to set up the air cooler because this requires some gentle hands for the installation.
2 people found this helpful
Yohan –
It did the job perfectly , it maintained my R5 3600 15 degree less than stock cooler..and the blue lighting was okeish for this price ..The problem i faced is during installation..the cooler screw which had the springs were very tough to screw. when i screwed a little bit harder at first , one of my memory channel didnt work , because of too much pressure on the cpu , i think the didnt seat properly .. then i removed again and reinstalled it .. the previous model which had just clips to hold would have been more trouble less. But after installation this product just blew my mind.Idle temps at high peformance power setting : 45 CStock cooler : 60 CCinebench r20 for 10mins : max temp 80 CStock cooler : 92 C
One person found this helpful
Dheeraj rani –
M a youtube and facebook streamer with channel name cute punjaban .without ac in my room it works magically for my pc even on i5processor
JoshAraujo –
Ryzen 3600 with stock cooler – 90C on max sustained load (gaming, animation work)Ryzen 3600 with this cooler – never goes above 58C even with sustained workloads (gaming, animation)Been using it for a couple weeks now and its literally perfect. Cheap and does it’s job, whatever could I ask for? ..easy, REMOVE THE BLUE LIGHT, there’s no option to turn it off ..and its bright.- – -tl:dr – great cooling at a low price. annoying blue LEDs dont turn off
vinay k –
Bought this some 3 weeks back on sale for around Rs. 1400. For the price, it is amazing. Went on my Tomahawk B450, on a Ryzen 2700.Pros.1) Quality product with well thought out layout.2) Fan can be detached and moved aroung the heatsink to suit position of connector. I have lowered it as much as possible so the airflow hits the RAM modules too.Cons.1) Not a deal breaker, but the provided manual states I need to place the two steel mounts( long plates) in X configuration. Did not match the holes on my B450. Had to switch position of one of the plates so now they are in CC config. Aligns fine that way.
Akshay kalia –
Pros:Better cooling than a single fan AIOEasy to installCons:If you have high performance Ram like vengeance pro the clearance is not adequateThe only way to install the product with vengeance pro is to blow in case rather than out of case.
Mr.Adarsh –
Deepcool gammaxx 400 v2 Blue led cpu cooler fits perfectly in Ant esports ice 211 Tg mid tower gaming cabinet
sumit –
It’s a good product for the latest processor it reduces the heat like a charm must buy.
Mohamed Aashiq ilahi –
Fan light not in v200 model but v400 model have light